Solved

Does ghost 10.0 support SATA and raid-5 drives?

Posted on 2007-11-20
3
3,119 Views
Last Modified: 2013-12-02
I have a dell server with a 14GB C: and a 65GB d:. I need to resize the C: partition to make it bigger. The server has 3 SCSI hared drives in a Raid-5 hardware configuration and the motherboard only supports SATA drives. The server has no floppy disk drive only a CD-ROM. I created a Ghost 7.5 boot CD but when I boot to it, it hangs up. If I boot to the server drive I can see and access the 80GB SATA HD. How can I Ghost to a SATA drive from the Raid drives?
0
Comment
Question by:mkaczowski
  • 2
3 Comments
 
LVL 39

Expert Comment

by:PUNKY
ID: 20325083
Create a floppy DOS ghost bootable disk and try that out, no harm at all. However, the sata drive is in question here for old version of ghost like version 10. If you could upgrade to 12 or solution suite 2, then you plan is not a problem.

http://ghost.radified.com/
0
 

Author Comment

by:mkaczowski
ID: 20339905
Once again, there is no floppy drive. Are you saying that version 12 WILL work.
And does it come with a bootable CD to accomplish this.
0
 
LVL 39

Accepted Solution

by:
PUNKY earned 500 total points
ID: 20340993
Yes it comes with bootable CD.
0

Featured Post

NAS Cloud Backup Strategies

This article explains backup scenarios when using network storage. We review the so-called “3-2-1 strategy” and summarize the methods you can use to send NAS data to the cloud

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Storage devices are generally used to save the data or sometime transfer the data from one computer system to another system. However, sometimes user accidentally erased their important data from the Storage devices. Users have to know how data reco…
Create your own, high-performance VM backup appliance by installing NAKIVO Backup & Replication directly onto a Synology NAS!
To efficiently enable the rotation of USB drives for backups, storage pools need to be created. This way no matter which USB drive is installed, the backups will successfully write without any administrative intervention. Multiple USB devices need t…
This tutorial will show how to configure a new Backup Exec 2012 server and move an existing database to that server with the use of the BEUtility. Install Backup Exec 2012 on the new server and apply all of the latest hotfixes and service packs. The…

789 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question