Solved

Allow rule inbound through the ASDM

Posted on 2007-11-22
1
992 Views
Last Modified: 2008-02-01
I have a PIx 515e running IOS version 8 and ASDM version 6.  I am able to access the internet from all of my internal computers running 10.x.x.x addressess.  I am using PAT on the external interface.  My problem is when I create a firewall rule to allow inbound access to a webserver, etc; connections are being dropped.  I am new to Pix and I think i have hit a roadblock. I read in articles  that to allow inbound rules you have to create an ACL and a NAT rule.  Could someone please explain how to properly to this through the ASDM?
0
Comment
Question by:sysadmin_02
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
1 Comment
 
LVL 28

Accepted Solution

by:
batry_boy earned 500 total points
ID: 20337262
That is correct that you have to set up static NAT and create an ACL to allow the traffic.

Here is a link with instructions on the ACL construction with the ASDM:

http://www.cisco.com/en/US/docs/security/asa/asa80/asdm60/user/guide/aclrules.html

Here is a link with instructions on setting up the NAT in the ASDM (specifically, look at the section on setting up "Static NAT"):

http://www.cisco.com/en/US/docs/security/asa/asa80/asdm60/user/guide/nat.html#wp1057544
0

Featured Post

Industry Leaders: We Want Your Opinion!

We value your feedback.

Take our survey and automatically be enter to win anyone of the following:
Yeti Cooler, Amazon eGift Card, and Movie eGift Card!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

We sought a budget ($5,000) firewall solution that would provide all the performance we needed with no single point of failure.  Hosting a SAAS web application in our datacenter, it was critical that we find a way to keep connectivity up and inbound…
Optimal Xbox 360 connectivity requires "OPEN NAT". If you use Juniper Netscreen or SSG firewall products in a home setting, the following steps will allow you get rid of the dreaded warning screen below and achieve the best online gaming environment…
In this video we outline the Physical Segments view of NetCrunch network monitor. By following this brief how-to video, you will be able to learn how NetCrunch visualizes your network, how granular is the information collected, as well as where to f…
In this brief tutorial Pawel from AdRem Software explains how you can quickly find out which services are running on your network, or what are the IP addresses of servers responsible for each service. Software used is freeware NetCrunch Tools (https…

726 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question