Solved

Setup of a Cisco 1131AG - Simulaneous Secure and Open Connections

Posted on 2007-11-22
1
1,141 Views
Last Modified: 2013-12-21
I want this to hook up a Cisco 1131AG WAP to our Windows network and 1) serve out a secure WPA connection that would pass full network access to authenticated users, and 2) also serve out an open connection giving Internet only to guests, etc.

I understand this is possible as you can set up a VLAN on this device?  Detailed steps would help. I've setup tons of WAPs, but never a Cisco WAP.  Detailed steps are what I'm looking for!

Thanks!
0
Comment
Question by:gunschee
1 Comment
 
LVL 1

Accepted Solution

by:
HOPE-IT earned 500 total points
ID: 20417124
1. point the AP to the radius server.
If you havent set one up, it's the IAS + CA in the add and remove windows components.  Authorize your IAS server in the DHCP server.  Create a wireless profile and apply it to anyone who need wireless access on active directory.

2.  Get another Access point.  or you can pass two vlan to the access point and use one VLAN for each SSID.  Remember to create a ip pool for the public access and some access lists to isolate them.
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Hi there, This article summarizes what you need if you are going to set up your home or small business Network Attached Storage (NAS) to be accessible from the internet. Of course there are configuration differences based on your NAS or router ma…
#Citrix #Citrix Netscaler #HTTP Compression #Load Balance
This Micro Tutorial will show you how to maximize your wireless card to its maximum capability. This will be demonstrated using Intel(R) Centrino(R) Wireless-N 2230 wireless card on Windows 8 operating system.
Viewers will learn how to connect to a wireless network using the network security key. They will also learn how to access the IP address and DNS server for connections that must be done manually. After setting up a router, find the network security…

773 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question