Solved

Want to know which cisco route supports Captive Portal , Does 7301 router supports captive portal

Posted on 2007-11-25
10
3,174 Views
Last Modified: 2013-12-14
Want to know which cisco route supports Captive Portal , Does 7301 router supports captive portal if not which kind of router supports Captive portal. Only the first time it should the portal should ask for authentication and after sucessfull login it should not ask for login we should be able to browse.
0
Comment
Question by:rpmindtools
  • 5
  • 5
10 Comments
 
LVL 2

Expert Comment

by:PaulOsborne2009
ID: 20346906
Supported Platforms
Cisco 7200 Series Routers
Cisco 7301 Routers
Cisco 7400 Series Routers
Multiprocessor WAN Application Processor (MWAM) in Catalyst 6500 series switches
MWAM in Cisco 7600 series routers

Basically you need three components:

Cisco Service Selection Gateway (SSG) : IOS feature
Cisco Subscriber Edged Service Manager (SESM) : Software
Authentication Server

once you get these plugins/additions to the IOS you should be able to navigate everything based upon your need
0
 

Author Comment

by:rpmindtools
ID: 20347032
Hey i have 7301 router , IOS 12.2(31) SB6 version of IOS . Do i need to have SESM also even if i have ISG feature . I want to make some service configurations in the router .
0
 

Author Comment

by:rpmindtools
ID: 20347033
Also we are looking for some expertise to solve our issues can you refer to any forums or consultants who can assist us in this. solution
0
 
LVL 2

Expert Comment

by:PaulOsborne2009
ID: 20347624
ISG is a feature but SESM is a policy server and must be configured to get full functionality out of Captive portal, you can configure it based on your needs by accessing the following link:

http://www.cisco.com/en/US/products/sw/netmgtsw/ps4889/products_configuration_guide_book09186a00801bcae4.html)

also please note this statement in regards to Captive Portal

Basically you need three components:

Cisco Service Selection Gateway (SSG) : IOS feature
Cisco Subscriber Edged Service Manager (SESM) : Software
Authentication Server

also check this link out for other configuration needs, read it all and figure the exact need for you situation, im thinking the triple play fits with what your needing but again i dont have specifics on what your doing just understanding your need to utilize captive portal.
0
 
LVL 2

Expert Comment

by:PaulOsborne2009
ID: 20347627
0
Maximize Your Threat Intelligence Reporting

Reporting is one of the most important and least talked about aspects of a world-class threat intelligence program. Here’s how to do it right.

 

Author Comment

by:rpmindtools
ID: 20352544
This is confusing do you any one complete deplyment configurations. I want to use L4 redirection authentication once authenticated L4 redirection should be unapplyed and should be able to acess internet.
0
 
LVL 2

Expert Comment

by:PaulOsborne2009
ID: 20372761
Configuring Layer 4 Redirect for Model 3
Define redirect server groups in ISG. These groups will be used by the Layer 4 Redirect services to redirect subscriber traffic.

redirect server-group BROADHOP

server ip 172.16.5.45 port 8091

!

redirect server-group PERIODIC_L4R

server ip 172.16.5.57 port 80

!

redirect server-group SPECIFIC_PORT_L4R

server ip 172.16.5.57 port 80


!

! ACL 197 is used by SERVICE_403_SPECIFIC_PORT_L4R

access-list 197 deny   tcp any host 172.16.5.45 eq www

access-list 197 deny   tcp any host 172.16.5.45 eq 8080

access-list 197 permit tcp any any eq 8080

!

! ACL 199 is used by SERVICE_403_PL4R

access-list 199 deny   tcp any host 172.16.5.45 eq www

access-list 199 deny   tcp any host 172.16.5.45 eq 8080

access-list 199 permit tcp any any eq www

0
 

Author Comment

by:rpmindtools
ID: 20464846
Hey hi thanks for your comments . Just a few more questions does can you suggest me any router which supports IOS  12.2(31) SB10 software
0
 
LVL 2

Accepted Solution

by:
PaulOsborne2009 earned 500 total points
ID: 20465916
Cisco IOS Release 12.2SB supports the following platforms:

"Cisco 7200 series routers (including the Cisco 7201, Cisco 7204VXR and Cisco 7206VXR routers)

"Cisco 7301 router

"Cisco 7304 router

"Cisco 10000 series routers (the Cisco 10008 with a PRE-2 or PRE-3)
0
 

Author Closing Comment

by:rpmindtools
ID: 31410871
Great solutions Paul Thanks,
0

Featured Post

Free Trending Threat Insights Every Day

Enhance your security with threat intelligence from the web. Get trending threat insights on hackers, exploits, and suspicious IP addresses delivered to your inbox with our free Cyber Daily.

Join & Write a Comment

Problem Description:   Couple of months ago we upgraded the ADSL line at our branch office from Home to Business line. The purpose of transforming the service to have static public IP’s. We were in need for public IP’s to publish our web resour…
Creating an OSPF network that automatically (dynamically) reroutes network traffic over other connections to prevent network downtime.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

706 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

15 Experts available now in Live!

Get 1:1 Help Now