Solved

Mitel SX-200 ICP and DHCP on a W2K Server

Posted on 2007-11-26
2
790 Views
Last Modified: 2008-04-29
I don't know anything about IP phones. We use a Mitel SX-200 ICP and about 26 IP phones with built in switches for connecting PC's. Recently our DHCP configuration got wiped out on our W2K server and now our phones are stuck at "WAITING FOR DHCP". Can anyone help me with reconfiguring the dhcp appropriately? Everything I have read and tried still isn't getting an IP to these phones.

VLAN 1: LAN 192.168.0.X
VLAN 2: IP Phones 192.168.5.X

Also let me know what info you need and I will find out. Any help is greatly appreciated.
0
Comment
Question by:CoSmismgr
2 Comments
 
LVL 18

Accepted Solution

by:
Johnjces earned 500 total points
ID: 20350206
The information you provided is minimal, so we must assume that you went into

Start > Program Files > Administrative Tools > DHCP

reconfigured the service and then restarted the service.

If so, and still nothing happens make sure that your servers network interface card is on the same subnet.
Still if nothing happens I'd ensure a reboot of all my phones.
Still if nothing happens, reboot thre server, and again if nothing is happening remove and reinstall the DHCP server service.

My thoughts anyway.

John
0
 
LVL 5

Author Comment

by:CoSmismgr
ID: 20354024
Turns out the DHCP configuration was vendor specific for the Mitel phones. I had to recreate specific additions and assign a certain value to each. I also ended up having to delete the configuration for VLAN ID to get it working.

Closing this thread.
0

Featured Post

Complete VMware vSphere® ESX(i) & Hyper-V Backup

Capture your entire system, including the host, with patented disk imaging integrated with VMware VADP / Microsoft VSS and RCT. RTOs is as low as 15 seconds with Acronis Active Restore™. You can enjoy unlimited P2V/V2V migrations from any source (even from a different hypervisor)

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Some sers suddenly getting error popup msg 28 89
Need some help with Cisco 3750 switch configuration 8 29
Internet Protocol Security question 3 73
Cloud Migration Questions 8 42
Data center, now-a-days, is referred as the home of all the advanced technologies. In-fact, most of the businesses are now establishing their entire organizational structure around the IT capabilities.
If you're not part of the solution, you're part of the problem.   Tips on how to secure IoT devices, even the dumbest ones, so they can't be used as part of a DDoS botnet.  Use PRTG Network Monitor as one of the building blocks, to detect unusual…
Viewers will learn how to connect to a wireless network using the network security key. They will also learn how to access the IP address and DNS server for connections that must be done manually. After setting up a router, find the network security…
Here's a very brief overview of the methods PRTG Network Monitor (https://www.paessler.com/prtg) offers for monitoring bandwidth, to help you decide which methods you´d like to investigate in more detail.  The methods are covered in more detail in o…

810 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question