Solved

WinXP won't install logitech driver for Chordless Mouse

Posted on 2007-11-27
4
3,171 Views
Last Modified: 2013-12-09
I finally got windows to find my cordless mouse, but now it won't accept the driver for the specific mouse, needed to program the software package. In other words, the mouse is working on a generic cordless driver. I need it to accept the logitech cordless mouse driver in order for the setpoint software to work correctly.
0
Comment
Question by:jodyfaison
  • 2
  • 2
4 Comments
 
LVL 4

Expert Comment

by:stronghold888
ID: 20376414
Where comes the mouse from? Microsoft or Logitech?

What version of Windows you are using?

Usually when the driver is not accepted, there are 2 choices: either the driver is not updated or either is not "digitally signed". If the mouse comes from Logitech, go to Logitech website, find the cordless mouse name then download the adapted driver and install. Same thing for Microsoft.

Hope it helps
stronghold888
0
 

Author Comment

by:jodyfaison
ID: 20380050
thanks yes it's a logitech mouse. I've installed the new updated software and such and even contacted Logitec. I think my problem is related to my installer not working correctly. I'm working on that problem in another open question.
0
 
LVL 4

Accepted Solution

by:
stronghold888 earned 400 total points
ID: 20381606
Desinstall the software and the mouse driver, reboot and then reinstall it. If you had a different mouse before, the old driver was not really replaced with the new. In this case, if you desinstall the mouse's software, reboot then reinstalling, it might solve your problem.

stronghold888
0
 

Author Comment

by:jodyfaison
ID: 20388481
I accepted the earlier answere because I thought my problem was reltated to an corupt windows installer- once I got the installer fixed the logitech mouse would still not load. I found a solution on the net and wanted to share it here: So here's a copy of the forum post:
The "WDF Coinstaller installation", which is part of the SetPoint 4.0 drivers, is the cause. I was able to install this update only after unplugging my G7 Mouse. But upon re-plugging of the Mouse receiver on to the USB Port, the "WDF Coinstaller installation" launches again, and
1) hangs. INF install will not continue and the XP hardware update wizard takes forever;
2) sends a error code to the driver installer itself and than the hardware update wizard fails with a fatal error;
 
THE SOLUTION (this took three days for me to find it out):
go to \programs\common files\logitech\CDDRV (if you can't find this folder, simply seach for "LfMouHid.inf". Open the file for EDIT.
Delete this lines:
 
;--- WDF Coinstaller installation ------
;
[DestinationDirs]
LOGIHIDMOUSE_Inst_CoInstaller_CopyFiles = 11
[LOGIHIDMOUSE.NT.CoInstallers]
AddReg=LOGIHIDMOUSE_Inst_CoInstaller_AddReg
CopyFiles=LOGIHIDMOUSE_Inst_CoInstaller_CopyFiles
[LOGIHIDMOUSE_Inst_CoInstaller_AddReg]
HKR,,CoInstallers32,0x00010000, "WdfCoInstaller01005.dll,WdfCoInstaller"
[LOGIHIDMOUSE_Inst_CoInstaller_CopyFiles]
WdfCoInstaller01005.dll
[SourceDisksFiles]
WdfCoInstaller01005.dll=1   ; make sure the number matches with SourceDisksNames
[LOGIHIDMOUSE.NT.Wdf]
KmdfService = LMouFilt, LOGIHIDMOUSE_wdfsect
[LOGIHIDMOUSE_wdfsect]
KmdfLibraryVersion = 1.5
;-------end of WDF section

 
Save the .inf file. Launch the driver update wizard again, select "manual" and point to the CDDRV folder. Select the new edited "LfMouHid.inf" file and THE 4.00 DRIVER WILL BE INSTALLED WITHOUT PROBLEMS!!
The only thing is, since we have edited the inf-file, the driver is not signed anymore, but who cares?
 
Try this, post your results!
 
I hope this will finally help...
0

Featured Post

How your wiki can always stay up-to-date

Quip doubles as a “living” wiki and a project management tool that evolves with your organization. As you finish projects in Quip, the work remains, easily accessible to all team members, new and old.
- Increase transparency
- Onboard new hires faster
- Access from mobile/offline

Join & Write a Comment

I recently purchased an HP EliteBook 2540p notebook/laptop. It has two video ports on it – VGA and DisplayPort. HP offers an optional docking station for the 2540p that also has both a VGA port and a DisplayPort. There are numerous online reports do…
If you are having problems installing printer drivers, or if documents repeatedly get stuck in the print queue even after re-installing the printer drivers, then follow these steps to solve the problems. Please note that the steps are shown both for…
In this seventh video of the Xpdf series, we discuss and demonstrate the PDFfonts utility, which lists all the fonts used in a PDF file. It does this via a command line interface, making it suitable for use in programs, scripts, batch files — any pl…
This video explains how to create simple products associated to Magento configurable product and offers fast way of their generation with Store Manager for Magento tool.

708 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

17 Experts available now in Live!

Get 1:1 Help Now