?
Solved

Utiliies to repair Corrupt File

Posted on 2007-11-29
6
Medium Priority
?
4,424 Views
Last Modified: 2013-12-02
I have a ghost 2003 images file named "C_Drive.v2i", when opening in Ghost 12 (2007/8) I recieve the error above. I have contacted Symantec who have said the file is corrupt, try running chkdsk /r on the drive.
I have done this but it found no errors.  I have also tried my unusal getout clause which is to mount it on Linux and run fsck this also found NO errors. I have also copied the file to an NTFS volume and retries all the checks and to open it but to no avail.
I MUST retrieve the data from this file. can anyone suggest any good utilites for fixing these type of errors.
0
Comment
Question by:sifenwick
  • 3
  • 2
6 Comments
 
LVL 88

Assisted Solution

by:rindi
rindi earned 1000 total points
ID: 20388064
Check the following Link and try some of the commandline switches to restore the image, like "CRCIGNORE".

http://ghosting.netfirms.com/switchesal.htm
0
 

Author Comment

by:sifenwick
ID: 20512215
I am cirrently using ghost2008 to try and restore this, Is there a way to apply the /crcignore using this version?
0
 
LVL 88

Expert Comment

by:rindi
ID: 20512232
I don't know the differences of all the versions. Have you checked the manual and readme files of yours? Or have you tried using the switch? All ghost versions I know you can start from a command prompt (boot from DOS), and then you can apply all those switches.
0
Never miss a deadline with monday.com

The revolutionary project management tool is here!   Plan visually with a single glance and make sure your projects get done.

 

Assisted Solution

by:Kricheldorf
Kricheldorf earned 1000 total points
ID: 20700853
I have the same problem as sifenwich: error ED80012 - CRC check or frame header unvalid.
Is there a possiblility to restore the valid datas from my v2i-File (saved with Norton Ghost 10). This is my last chance to get back most of my datas.
Currently I use Norton Ghost 12 (old version 10 I have too) but in both versions I haven´t find a command line possibility to use /crcignore. In the manuals of this versions there isn´t to find something about that.
Is there a possibility to restore perhaps with a other software. Some help would be greatful.
0
 

Accepted Solution

by:
sifenwick earned 0 total points
ID: 21716631
My Appologies guys, I have since found that the file above was part of 6 set, therefore was not corrupt just incomplete - sorry for wasting your time.
0
 

Author Comment

by:sifenwick
ID: 22127466
Found answer myself, there was no fault.
0

Featured Post

Never miss a deadline with monday.com

The revolutionary project management tool is here!   Plan visually with a single glance and make sure your projects get done.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Are you looking to recover an email message or a contact you just deleted mistakenly? Or you are searching for a contact that you erased from your MS Outlook ‘Contacts’ folder and now realized that it was important.
Microsoft will be releasing the Windows 10 Creators Update in just a matter of weeks. Are you prepared? Follow these steps to ensure everything goes smoothly and you don't lose valuable data on your PC.
This tutorial will walk an individual through locating and launching the BEUtility application to properly change the service account username and\or password in situation where it may be necessary or where the password has been inadvertently change…
This tutorial will walk an individual through configuring a drive on a Windows Server 2008 to perform shadow copies in order to quickly recover deleted files and folders. Click on Start and then select Computer to view the available drives on the se…
Suggested Courses

601 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question