SCSI drive ST373307LC does not recognized

I bought a almost new SCSI drive seagate ST373307LC, and found sector errors from SCSI controller. I entered to Controller menu and tried to format it. But it fails with an error. And downloaded SeaTools for DOS, booted from the CD, the disk is not registered from this tool. Know someone any dos disk rescue tools, so that at least the disk shows when dos SeaTools booted?
tilmesAsked:
Who is Participating?
 
PUNKYConnect With a Mentor Commented:
I think you have faulty drive though, the new drive should have no such issue. Could you list your system specs (power supply, how many devices / etc.)?
0
 
PUNKYCommented:
Is the drive detected in bios correct in size?
0
 
tilmesAuthor Commented:
yes it shows 80gb. Instead of 76gb.
0
Cloud Class® Course: CompTIA Healthcare IT Tech

This course will help prep you to earn the CompTIA Healthcare IT Technician certification showing that you have the knowledge and skills needed to succeed in installing, managing, and troubleshooting IT systems in medical and clinical settings.

 
tilmesAuthor Commented:
I have verify the media already, and got an error.
0
 
tilmesAuthor Commented:
While booting it shows in controller "MEDIUM ERROR"
0
 
tilmesAuthor Commented:
It has a adaptec SCSI controller and while media verfiy show "04h hardware error"
0
 
PUNKYCommented:
4H Hardware error. The drive detected a non-recoverable hardware failure while performing the command or during a self-test. This includes, for example, SCSI interface parity errors, controller failures and device failures.

Try update firmware for scsi controller card first, then try again.
0
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

All Courses

From novice to tech pro — start learning today.