Solved

Unable to get any virtual devices to see one another

Posted on 2007-11-29
2
218 Views
Last Modified: 2010-04-18
I've setup 2 virtual servers and 1 XP Pro PC in Window Virtual Server 2005.
My problem is I'm trying to get one virtual server (234) to join the domain I've created with the other virtual server (233).  After verifying that my virtual devices can get out on the internet and see other servers outside my virtual environment, I tested my virtual environment.  None of these devices can talk to each other.  I'm stumped.
What am I doing wrong?
Is there something on my host server (232) that's blocking the traffic?

I'm new at this virtual stuff so please keep it simple for me.
0
Comment
Question by:ATC-SyTech
2 Comments
 
LVL 15

Accepted Solution

by:
JimboEfx earned 125 total points
ID: 20380565
Are the virutal machines connected to the same virtual network?

These articles partially reference it?
http://www.microsoft.com/technet/technetmag/issues/2006/03/DoMore/

http://blogs.msdn.com/virtual_pc_guy/archive/2005/04/01/404816.aspx

If you do an ipconfig what ip addresses do they have?

0
 

Author Comment

by:ATC-SyTech
ID: 20384169
JimboEfx,
I'm reading the articles but I thought I'd send you the info you requested:
my ipconfig on the 2 servers have static ip addresses:
Domain Controller: 233
server2: 234
PC1 is DHCP from my DHCP server outside my virtual network.
PC1: 97

Servers and PC have these address:
Gateway: 192.168.1.1
DNS: 192.168.1.251

 
0

Featured Post

Best Practices: Disaster Recovery Testing

Besides backup, any IT division should have a disaster recovery plan. You will find a few tips below relating to the development of such a plan and to what issues one should pay special attention in the course of backup planning.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

In this article, I will show you HOW TO: Suppress Configuration Issues and Warnings Alert displayed in Summary status for ESXi 6.5 after enabling SSH or ESXi Shell.
When rebooting a vCenters 6.0 and try to connect using vSphere Client we get this issue "Invalid URL: The hostname could not parsed." When we get this error we need to do some changes in the vCenter advanced settings to fix the issue.
Teach the user how to delpoy the vCenter Server Appliance and how to configure its network settings Deploy OVF: Open VM console and configure networking:
Teach the user how to use configure the vCenter Server storage filters Open vSphere Web Client:  Navigate to vCenter Server Advanced Settings: Add the four vCenter Server storage filters: Review the advanced settings: Modify the values of the four v…

792 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question