Solved

How to create a boot  floopy disk to boot cd

Posted on 2007-11-29
32
1,614 Views
Last Modified: 2013-12-02
Matrixnz,
follow up on this
 http://www.experts-exchange.com/Storage/Backup_Restore/Norton_Ghost/Q_22961944.html

now Im having trouble creating a driver b44 for optiplex 320
0
Comment
Question by:curioustoknow2007
  • 18
  • 12
32 Comments
 
LVL 29

Expert Comment

by:matrixnz
ID: 20376644
Download R149798 from http://support.dell.com/support/downloads/driverslist.aspx?c=us&l=en&s=gen&ServiceTag=&SystemID=PLX_PNT_320&os=WW1&osl=en&catid=&impid=

Copy ..\DOS\NDIS2\B44.dos to ..\NET\ Directory
Open Protocol.ini
Append the following to the end

[B44]
DriverName = B44$

Follow my instructions in the last post to get the Dev ID using "pciscan -v"

Append the following to your netcard.map file

ret="b44"
ven=14e4 "BroadCom"
dev=XXXX "Dell Optiplex 320 Broadcom NIC"

(where XXXX = Dev ID)

That's it, it should work

Cheers
0
 

Author Comment

by:curioustoknow2007
ID: 20376658
i ve tried that and did not work
0
 
LVL 29

Expert Comment

by:matrixnz
ID: 20376709
What doesn't work?
0
 

Author Comment

by:curioustoknow2007
ID: 20376950
i get error coud not load driver
0
 
LVL 29

Expert Comment

by:matrixnz
ID: 20376994
Can you post your protocol.ini and your netcard.map files
0
 

Author Comment

by:curioustoknow2007
ID: 20377068
; This is a map file for PCISCAN
;
; ret="Value to return"
; ven=<vendorID> ["Description"]
; dev=<deviceID> ["Description"]
;
; Keywords ret, ven and dev must be lowercase !!!
;
; To discover Ven and dev of known cards run PCISCAN -v (verbose mode) from command prompt
;
ret="b57"
ven=14e4 "BroadCom"
dev=16a6 "BCM5702X Gigabit Ethernet"
dev=16a7 "BroadCom NetXtreme"
dev=165d "BroadCom Ethernet"
dev=1677 "Dell Latitude D610 BroadCom NIC"
dev=167A "Dell Optiplex 745 BroadCom NIC"
dev=1600 "Dell Latitude D620 BroadCom NIC"


ret="e100b"
ven=8086 "Intel"
dev=2449 "82557 based PCI Ethernet Adaptor(10/100)"
dev=1031 "82557 based PCI Ethernet Adaptor(10/100)"
dev=103b "82557 based PCI Ethernet Adaptor(10/100)"
dev=1229 "82557 based PCI Ethernet Adaptor(10/100)"

ret="e1000"
ven=8086 "Intel"
dev=100e "82544 PRO/1000 MT Gigabit Ethernet Controller"
dev=10C0 "Vostro 200 Intel 10/100 Network"
dev=10BD "Optipl 755 Intel 10/100 Network"


ret="EL90X"
ven=10B7 "3COM"
dev=9200 "3COM 3C920 Ethernet Controller"

ret="RTSND"
ven=10EC "RealTek"
dev=8139 "RealTek 8139 Ethernet Card"

ret="B44"
ven=14E4 "BroadCom"
dev=170c "Dell Optiplex last 320 "
=================================
[PROTMAN]
drivername = PROTMAN$

[PKTDRV]
drivername = PKTDRV$
intvec = 0x60
chainvec =0x66

[E100b]
DriverName = "E100B$"

[E1000]
DriverName = "E1000$"

[B57]
DriverName = "B57$"

[El90x] = "El90x$"

[RTSND]
DriverName = RTSND$

[B44]
DriverName = "B44$"
0
 
LVL 29

Expert Comment

by:matrixnz
ID: 20377226
Everything looks ok there

Can you verify the B44.dos file is:

- In the NET Directory
- Named B44.dos (Note the UpperCase B this can sometimes cause issues)
- 55kb in Size
- Dated 16/12/2005

If all the above is true can you download R127295 it's an earlier version of the driver the files will be exactly the same, however in the past I have noted that some Dell Drivers can be corrupted, for e.g. when I tried to use the B57 Drivers from Dell Latitude D620 they wouldn't work, using the B57 Drivers from the Dell Optiplex 745 worked on both the Optiplex and the Latitude.

Could you also type out the exact message that comes up in Dos. i.e. is cannot load .dos or ?

Cheers
0
 

Author Comment

by:curioustoknow2007
ID: 20377494
from where did you obtain th b44.dos drivers? and yes the one I have is 55kb 16-12-2005
error; could not find the driver
0
 

Author Comment

by:curioustoknow2007
ID: 20377584
could not find any device the driver failed to load
0
 
LVL 29

Expert Comment

by:matrixnz
ID: 20377627
0
 

Author Comment

by:curioustoknow2007
ID: 20377637
is this driver for optiplex320?
0
 

Author Comment

by:curioustoknow2007
ID: 20377648
the one I have is  R149798 optiplex 320
0
 

Author Comment

by:curioustoknow2007
ID: 20377712
0
 
LVL 29

Expert Comment

by:matrixnz
ID: 20377723
Can you also do a pciscan again using the following line
pciscan -v>OutPut.txt

and then post OutPut.txt information here.

Cheers
0
 
LVL 29

Expert Comment

by:matrixnz
ID: 20377802
If you expand Network from your link above
Click Broadcom Driver
Click Other Versions
Click Broadcom 440x 10/100 Integrated Controller, v.v4.47, A16
You'll get R127295
0
Free camera licenses with purchase of My Cloud NAS

Milestone Arcus software is compatible with thousands of industry-leading cameras for added flexibility. Upon installation on your My Cloud NAS, you will receive two (2) camera licenses already enabled in the software. And for a limited time, get additional camera licenses FREE.

 

Author Comment

by:curioustoknow2007
ID: 20378315
i type in pciscan -v>OutPut.txt and it gives me abort?fail?retry
0
 
LVL 29

Expert Comment

by:matrixnz
ID: 20378467
Sorry you're using CD aren't you?  Can you use USB Drive or a Floppy drive or alternatively just type out the output after pciscan -v
0
 

Author Comment

by:curioustoknow2007
ID: 20379620
when I use the usb drive, I can not boot ino the mode to select shift=f5 command propmt to run the pciscan command, when I boot from the usb stick I get three option:boot to ghost, boot to hard drive restore or boot to dos
0
 
LVL 29

Expert Comment

by:matrixnz
ID: 20379651
When you press F12 to boot from a device then select the USB Device press F8 straight afterwards, then select Shift F8 then select normal it will go through the process
0
 

Author Comment

by:curioustoknow2007
ID: 20398681
ok fixed the issue for dell 320. now I want to ghost fujitsu tablet st series st5112 and I can t find the dos driver for the internet  
ven 11AB
dev 4363

Marvell yukon 88e8055 PCI-E gig
0
 

Author Comment

by:curioustoknow2007
ID: 20398748
Bus Dev Func Vend Dev. Class Name           Subclass Name      
-----------------------------------------------------------
  0   0    0 8086 27A0 Bridge               CPU/PCI            
  0   2    0 8086 27A2 Display              VGA                
  0   2    1 8086 27A6 Display              Other              
  0  1B    0 8086 27D8 Multimedia           ???                
  0  1C    0 8086 27D0 Bridge               PCI/PCI            
  0  1C    1 8086 27D2 Bridge               PCI/PCI            
  0  1C    2 8086 27D4 Bridge               PCI/PCI            
  0  1D    0 8086 27C8 Serial Bus           USB                
  0  1D    1 8086 27C9 Serial Bus           USB                
  0  1E    0 8086 2448 Bridge               PCI/PCI            
  0  1F    0 8086 27B9 Bridge               PCI/ISA            
  0  1F    1 8086 27DF Disk                 IDE                
  2   0    0 11AB 4363 Network              Ethernet            
  5   0    0 8086 4222 Network              Other              
  8   3    0 1217 7134 Bridge               PCI/CardBus        
  8   3    1 1217 7134 Bridge               PCI/CardBus        
  8   3    2 1217 7120 System Peripheral    ???                
17 PCI devices found
0
 

Author Comment

by:curioustoknow2007
ID: 20398825
found  marvell [11AB]
device could not load c:\net:yuknd
press any key to exit...
0
 
LVL 29

Expert Comment

by:matrixnz
ID: 20400763
Was the issue with the 320 corrupt driver?

You'll need to to a search for yuknd.dos you may have an old version that won't work with your card.
0
 

Author Comment

by:curioustoknow2007
ID: 20402783
320 I had to look for the newest driver
0
 

Author Comment

by:curioustoknow2007
ID: 20434842
Matrixnz,
I Tried To Image Dell Optiplex 320, The Driver Was Correclty Loaded and When I Click on Accept I did not see transfer Progress then suddenly I got an error, don't remmeber what It says and then when I reboot the optiplex 320 I recived " Disk error has occured Press Ctrl+Alt+Del " and could not do anything since, seems hard drive crashed !  
 

0
 

Author Comment

by:curioustoknow2007
ID: 20434844
do you have any idea what cause crashing hard drive.
0
 
LVL 29

Expert Comment

by:matrixnz
ID: 20435159
Hi curioustoknow2007

No, however it seems you have a faulty hdd, recommend calling Dell and asking to replace the drive, I sincerely doubt it has anything to do with Ghost or anything you've done.

Cheers
0
 

Author Comment

by:curioustoknow2007
ID: 20435173
this happened me several times when trying to ghost dell 320's, I did get brand new ones and when I ghost them , the transfer hang at 25% and when reboot I get disk read erro occured, I don't know if this has to do with the hard drive or with the image? But  the weired thing is that image .gho sometimes work sometimes hang.
 
0
 
LVL 29

Accepted Solution

by:
matrixnz earned 250 total points
ID: 20435278
If you only write half or quarter of the disk you should receive an error that basically says that there is no system disk, but shouldn't be a problem with the actual hdd, however the message "Disk error has occured Press Ctrl+Alt+Del" usually implies a faulty hdd.

Cheers
0
 

Author Comment

by:curioustoknow2007
ID: 20435543
oh I see because this doesn t happend all the time with the 320.
0

Featured Post

Best Practices: Disaster Recovery Testing

Besides backup, any IT division should have a disaster recovery plan. You will find a few tips below relating to the development of such a plan and to what issues one should pay special attention in the course of backup planning.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
MP3 storage in the cloud 2 80
Finder searched too broad a disk region 8 58
P2000 G3 iSCSI SAN spare drive config 5 81
data center consolidation 8 91
Workplace bullying has increased with the use of email and social media. Retain evidence of this with email archiving to protect your employees.
Are you looking to recover an email message or a contact you just deleted mistakenly? Or you are searching for a contact that you erased from your MS Outlook ‘Contacts’ folder and now realized that it was important.
This tutorial will walk an individual through configuring a drive on a Windows Server 2008 to perform shadow copies in order to quickly recover deleted files and folders. Click on Start and then select Computer to view the available drives on the se…
This tutorial will walk an individual through the process of installing of Data Protection Manager on a server running Windows Server 2012 R2, including the prerequisites. Microsoft .Net 3.5 is required. To install this feature, go to Server Manager…

863 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

19 Experts available now in Live!

Get 1:1 Help Now