Solved

Multiple partition on usb key

Posted on 2007-11-29
1
4,263 Views
Last Modified: 2012-06-21
Hi,

I have a few Rescue and Diagnostic CD disk and i want to transfert it into my usb key.

Is there any way i can make multiple partition in the usb key and install a sort of menu calling wich one will boot...

I try many solution to install a boot manager, but none of them go right into the usb key.

I also try to partition my key with Paragon partition manager for windows , but it seem have difficulty to gave a letter to the partition... always telling me that i have to reboot, and reboot again and nothing works..

First it is possible to do what i want?  and How to do it?

Thank you very much

Open in new window

0
Comment
Question by:Fled
1 Comment
 
LVL 7

Accepted Solution

by:
Wod earned 500 total points
ID: 20376355
It looks like it's possible, but there it seems like a complicated task..

Please have a look at these:

Windows:
http://www.msfn.org/board/Multiple-Partition-USB-Stick-Multi-Boot-OS-t69211.html

Linux:
http://forgeftp.novell.com/lfl/.html/bootable.html#bootusb.getting.usbdevname


Regards
0

Featured Post

Backup Your Microsoft Windows Server®

Backup all your Microsoft Windows Server – on-premises, in remote locations, in private and hybrid clouds. Your entire Windows Server will be backed up in one easy step with patented, block-level disk imaging. We achieve RTOs (recovery time objectives) as low as 15 seconds.

Join & Write a Comment

Suggested Solutions

If you have a USB Drive that is not recognized by Windows the problem is usually that you have too many network drives or other drives that occupy all the drive letters D: E: or F: which is the normal drive letter of a usb drive. The way to correct …
I have written before on the benefits of using a Boot media other than your HDD when it has become infected.   The article I wrote about creating a bootable CD/DVD/USB (http://e-e.com/A_2343.html) was mainly concerned with building a UBCD4Win on CD …
This video teaches viewers how to encrypt an external drive that requires a password to read and edit the drive. All tasks are done in Disk Utility. Plug in the external drive you wish to encrypt: Make sure all previous data on the drive has been …
This tutorial will walk an individual through the process of installing the necessary services and then configuring a Windows Server 2012 system as an iSCSI target. To install the necessary roles, go to Server Manager, and select Add Roles and Featu…

743 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

12 Experts available now in Live!

Get 1:1 Help Now