VPN Via Cisco PIX to Draytek Load Balancing router

Does anyone know if it's possible to connect a router to router VPN with CISCO PIX and a Draytek VIGO2910?
LVL 1
davemillhouseAsked:
Who is Participating?
 
batry_boyConnect With a Mentor Commented:
I haven't actually done it with a Draytek before, but I looked up the specs on the Draytek and since it can do IPSEC, then you should be able to do it just fine.  Here is a link for the L2L setup for the PIX:

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a0080094761.shtml

The example URL above shows how to connect two PIX firewalls via IPSEC.

On page 106 of the Draytek User's Guide (found at the below link), it shows how to set up a L2L tunnel.

ftp://ftp.draytek.com/Vigor2910/Manual/UG_English_V3.2.zip
0
 
davemillhouseAuthor Commented:
Thanks very much for your help. I hope this works.
0
All Courses

From novice to tech pro — start learning today.