Go Premium for a chance to win a PS4. Enter to Win

x
  • Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 738
  • Last Modified:

Accessing server on different ip network

Hi,

We have a SBS server (PDC, DNS, DHCP) with 2 NIC's

LAN IP: 192.168.1.10
Subnet: 255.255.0.0
Gateway: blank
DNS: 192.168.1.10

WAN IP: 192.192.1.11
Subnet: 255.255.0.0
Gateway: 192.192.1.1
DNS: 192.168.1.10

Router/Modems IP : 192.192.1.1
Subnet: 255.255.0.0

We have our IP Phones with the following address:

IP: 192.168.4.x
Subnet: 255.255.0.0
Gateway: 192.168.1.10
DNS: 192.168.1.10


We have our Switchvox PBX which has one NIC with:

IP: 192.168.4.250
Subnet: 255.255.0.0
Gateway: 192.168.1.10
DNS: 192.168.1.10


Basically our setup looks like this;


MODEM/ROUTER (NAT) ------SBS Server WAN NIC-----SBS Server LAN NIC-----Network Switch
                                                                                                                                    |                    |
                                                                                                                                    |                 IP Phones/PABX
                                                                                                                                    |                                                                                                                                                                                                                                                                                                                                                                  
                                                                                                                                    |        
                                                                                                                                    |
                                                                                                                     Workstations



The problem is that with our Workstations, they cannot access the PABX system, only if they change there IP to 192.168.4.XX.

Does anyone have any suggestions?

Cheers


Open in new window

0
james_daley
Asked:
james_daley
  • 2
1 Solution
 
sysreq2000Commented:
Make sure the subnet mask on the workstations is 255.255.0.0.
0
 
james_daleyAuthor Commented:
MODERATOR, PLEASE CLOSE THIS QUESTION...IT NO LONGER REQUIRES AN ANSWER...
0
 
sysreq2000Commented:
What was the solution?
0

Featured Post

Free Tool: Subnet Calculator

The subnet calculator helps you design networks by taking an IP address and network mask and returning information such as network, broadcast address, and host range.

One of a set of tools we're offering as a way of saying thank you for being a part of the community.

  • 2
Tackle projects and never again get stuck behind a technical roadblock.
Join Now