Could not connect all network drives, but all appear to be connected
Posted on 2007-12-03
I have a logon.bat file that runs when users log in to their pc's. I am using Active Directory in the user setup for logon.bat.
It seems that when logging in, users will receive the prompt, could not connect all network drives, but, when going to Explorere, they are all mapped with no problems.
This logon.bat file was created before I came here, and yes, 2 drives are connected to the same place. Working on changing that, but different applications point to different drives.
Here is the logon.bat:
net time \\bbkw1notes /set /yes
net use F: \\server\ddrive
rem net use H: \\fs1\vol2
net use J: \\bbkw1notes\intell-a-check
rem net use L: \\FS1\Vol4
net use N: \\server\ddrive
rem net use O: \\FS1\sys
rem net use P: \\FS1\Vol6
rem net use R: \\fs1\vol2
net use W: \\server\docs
rem net use X: \\fs1\vol3
net use Y: \\server\%username%
rem regedit /s \\server\netlogon\dst.reg
rem cscript \\server\netlogon\dst.vbs
All the rem lines point to a server that is no longer in existence, I would like to remove thoses completely. As well as the rem lines at the end of the script.
Would the old locations be causing the message?