Solved

Problems after boot.ini configuration

Posted on 2007-12-04
6
253 Views
Last Modified: 2010-03-05
I had recieved the error below, and i also tried to the solution recommend on the reply to my question. This did not work to fix my problem so i reverted back to the copy of the original boot.ini and when i load into the OS i can't connect to my domain (exchange) I Looked to see if i had services turned off and the exchange services that are set to automatic will not start because it can't find the domain. I am needing anything to get my domain found with the users. On my IMAP4SVC service i'm getting an error with Event 1040 part of the reason i can't connect to my domain.

Origianal Question
Event ID: 5774
Question: I am still receiving the following error after looking at other solutions for this even error. The error is as follows:

Registration of the DNS record '_kpasswd._tcp.xxxxxxxxx-xxx.com. 600 IN SRV 0 100 464 exchange.xxxxxxxxx-xxx.com.' failed with the following error:
Bad DNS packet.

Solution i tried to do and it failed

Microsoft Windows Server 2003 (any edition)
Edit the BOOT.ini file and add the parameter "/usepmtimer," then reboot the server. Adding the "/usepmtimer" parameter to the BOOT.INI file configures the Windows operating system to use the PM_TIMER, rather than the Time Stamp Counter.
0
Comment
Question by:Crestwood
6 Comments
 
LVL 9

Expert Comment

by:QBRad
ID: 20403327
What if you disjoin the computer from the domain and then join it back again.
0
 

Author Comment

by:Crestwood
ID: 20403623
i think that it's giong back to something with the time stamp counter because(even though i'm on the orginal boot.ini) it hangs on the preparing network connections @ the start and then gives me a message that says one or more services failed to start. I was able to connect to the exchange domain and see my users but i still can't get the following services to start that are set to automatic.

I'm getting a warning that i think may be the cause from that time stamp.

WMI ADAP was unable to process the PerfDisk performance libary die to a time violation in the open function
0
 
LVL 4

Expert Comment

by:Joediggity2
ID: 20409120
Have you tried to reinstall your NIC drivers?   Also can you ping the exchange server?  Is your DNS server operational?
0
 

Author Comment

by:Crestwood
ID: 20412180
it actually turned out that we had some .log files that where deleted and our Active Directory was trashed with a system error. we ran the eseutil.exe on our priv1.edb  It was able to repair the database. We are having to reload the exchage server but this time we are going to make it part of our main domain not it's own domain. Once reloaded we are going to try and rebuild our database to recovery some of the mail.
0
 
LVL 1

Accepted Solution

by:
Computer101 earned 0 total points
ID: 20560303
PAQed with points refunded (500)

Computer101
EE Admin
0

Featured Post

Is Your Active Directory as Secure as You Think?

More than 75% of all records are compromised because of the loss or theft of a privileged credential. Experts have been exploring Active Directory infrastructure to identify key threats and establish best practices for keeping data safe. Attend this month’s webinar to learn more.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

This article covers how to install the Microsoft Windows Operating System (OS). What is covered in this article:  > Different Versions and Editions of the Windows OS  > Upgrading versus Fresh Installation of the OS           - Steps to take pr…
Log files are useful in diagnosing and repairing problems.  This is a list of common log files and their standard locations that I've compiled.   While this is not exhaustive, it is a pretty good list that I've found to be useful.  I may update it f…
This video Micro Tutorial explains how to clone a hard drive using a commercial software product for Windows systems called Casper from Future Systems Solutions (FSS). Cloning makes an exact, complete copy of one hard disk drive (HDD) onto another d…
With the advent of Windows 10, Microsoft is pushing a Get Windows 10 icon into the notification area (system tray) of qualifying computers. There are many reasons for wanting to remove this icon. This two-part Experts Exchange video Micro Tutorial s…

895 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

13 Experts available now in Live!

Get 1:1 Help Now