Solved

Scanning on a network

Posted on 2007-12-05
1
1,115 Views
Last Modified: 2010-05-18
I have a canon 1022 and I can print to it fine and scan from one machine that is connected through USB but the networked ones cant scann from it. It says that another program is using it and to tyr again . But i know no other program is using it. i updated the drivers on all machines. im at a loss
0
Comment
Question by:level9tech
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
1 Comment
 
LVL 28

Accepted Solution

by:
batry_boy earned 500 total points
ID: 20412563
Have you ever been able to scan over the network like this?  I can't find any docs on that particular model, but not all multifunction scanners/copiers/printers that I've worked with before support that capability.  I would verify that it actually is supposed to be able to scan over the network and not just to a locally attached (USB) machine before troubleshooting further.

Once you've verified that, I would try unplugging the USB cable from that locally attached machine and try again to scan over the network.  Maybe it can't do that while a machine is locally attached...
0

Featured Post

Building an interactive eFuture classroom

Watch and learn how ATEN provided a total control system solution including seamless switching matrix switch, HDBaseT extenders, PDU, lighting control to build an interactive eFuture classroom.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

For many of us, the  holiday season kindles the natural urge to give back to our friends, family members and communities. While it's easy for friends to notice the impact of such deeds, understanding the contributions of businesses and enterprises i…
This article is in regards to the Cisco QSFP-4SFP10G-CU1M cables, which are designed to uplink/downlink 40GB ports to 10GB SFP ports. I recently experienced this and found very little configuration documentation on how these are supposed to be confi…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
In this video we outline the Physical Segments view of NetCrunch network monitor. By following this brief how-to video, you will be able to learn how NetCrunch visualizes your network, how granular is the information collected, as well as where to f…
Suggested Courses

615 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question