LDAP TAM configuration

Hi,

We have LDAP, TAM components (Policy Server, Authorization Server) installed on one UNIX machine. and Webseal installed in another machine.

We planned to change the IP address of both machines. So, what are the necessary configuration changes we need to make inorder to accomdiate NEW ip address as LDAP host, Policy Server host, Authorization host.
wasuserAsked:
Who is Participating?
 
HonorGodConnect With a Mentor Commented:
Good luck.  Please share what you learn.
0
 
HonorGodCommented:
Are the hostnames changing, or just the IP addresses?

What was used to configure each machine, an IP address, or a hostname?

If, for example, you installed and configured the machines using hostnames, and now the IP addresses need to change, but you are able to keep the hostname, then this might be as simple as updating the DNS to provide the "new" IP address for each hostname...
0
 
HonorGodCommented:
Do these help?

Title: Do the TAM Components work if changing the IP address of the machine ?
  URL: http://IBM.com/support/docview.wss?rs=638&uid=swg21260548

Title: Changing the IP address and hostname on the Web Portal Manager (WPM) server
  URL: http://IBM.com/support/docview.wss?rs=638&uid=swg21177516

Title: Changing IP address of WebSEAL
  URL: http://IBM.com/support/docview.wss?rs=638&uid=swg21286589
0
Free Tool: ZipGrep

ZipGrep is a utility that can list and search zip (.war, .ear, .jar, etc) archives for text patterns, without the need to extract the archive's contents.

One of a set of tools we're offering as a way to say thank you for being a part of the community.

 
wasuserAuthor Commented:
We used ip address to configure LDAP, TAM components such as Policy Server, authorization server.

I greatly appreciate your help in this regard.
0
 
HonorGodCommented:
Do the articles to which I pointed you help at all?
0
 
wasuserAuthor Commented:
Changing IP address of WebSEAL helps me!!!!

However, we have ip address on the Policy Server configuration(pd.conf) , Authorization server (ivacld.conf)

[ivacld.conf]

ivacld.conf:host = XXX.XX.XX.XX
ivacld.conf:master-host = XXX.XX.XX.XX
ivacld.conf:azn-app-host = XXX.XX.XX.XX

ldap.conf:host = XXX.XX.XX.XX

pd.conf:user-reg-server = XXX.XX.XX.XX
pd.conf:user-reg-host = XXX.XX.XX.XX
pd.conf:master-host = XXX.XX.XX.XX

Can i change this ip address manualy? or do i need to use pdconfig utility?

Thank you very much for your help.
0
 
HonorGodCommented:
You can use your favorite text editor to modify the pd.conf file, however, do so while the Policy server is stopped.

When you next restart the Policy Server, it will use this file to determine the IP addresses that it should use.
0
 
wasuserAuthor Commented:
Thank you very much !!!!!

What about Authorization Server (ivacld.conf) ????

can i change ldap.conf manualy????

Thank you very much for your help!!!
0
 
HonorGodCommented:
That is my understanding as well.
0
 
wasuserAuthor Commented:
Thank you very much!!!! i will check and let you know..... how it goes!!!!
0
 
wasuserAuthor Commented:
It works well .... However we also changed PolicyDirectory certificates on all our clients.
0
 
wasuserAuthor Commented:
Thank you very much, sir.
0
All Courses

From novice to tech pro — start learning today.