Solved

Creating Easy VPN Server with PIX 506e

Posted on 2007-12-05
4
568 Views
Last Modified: 2008-02-01
I have a network with 3 branch offices, and I need to set it up so that one of my 506e PIX devices is the Easy VPN server and the other VPN devices connect to it. Is there a good reference guide somewhere how to do this? I am really new to Cisco hardware.
0
Comment
Question by:daripley
  • 3
4 Comments
 
LVL 8

Expert Comment

by:Jeff Perry
ID: 20414127
0
 
LVL 8

Expert Comment

by:Jeff Perry
ID: 20414141
0
 

Author Comment

by:daripley
ID: 20414400
I just have PIX 506e's though, it seems like in those documents you linked to that the PIXs were only Easy VPN clients and not Easy VPN servers. Does the PIX 506e support being a Easy VPN server?
0
 
LVL 8

Accepted Solution

by:
Jeff Perry earned 500 total points
ID: 20414679
This document refers specifically to the PIX5xx acting as the VPN server. The configurations may be a bit daunting if you are really new to Cisco but they are commented to help you out.  

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a008019e6d7.shtml#server
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

This is an article about my experiences with remote access to my clients (so that I may serve them) and eventually to my home office system via Radmin Remote Control. I have been using remote access for over 10 years and have been improving my metho…
This article offers some helpful and general tips for safe browsing and online shopping. It offers simple and manageable procedures that help to ensure the safety of one's personal information and the security of any devices.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
As a trusted technology advisor to your customers you are likely getting the daily question of, ‘should I put this in the cloud?’ As customer demands for cloud services increases, companies will see a shift from traditional buying patterns to new…

820 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question