Solved

combine RRAS and point to point VPN tunneling

Posted on 2007-12-05
4
547 Views
Last Modified: 2010-04-21
I already have a RRAS server running I would like to have add a pix firewall and have vpn passthrough for RRAS and create a vpn tunnel between 2 sites ....is this possible and can someone advise me on how to approach  this
0
Comment
Question by:shadow2007
  • 3
4 Comments
 
LVL 28

Accepted Solution

by:
batry_boy earned 500 total points
ID: 20416644
If you'll be using PPTP as the tunneling protocol to the RRAS server, then you'll need to allow GRE and TCP 1723 inbound through the firewall to the RRAS, as well as create a static translation for that server.  Here's how:

static (inside,outside) <RRAS_server_public_ip> <RRAS_server_private_ip> netmask 255.255.255.255
access-list outside_access_in permit tcp any host <RRAS_server_public_ip> eq 1723
access-list outside_access_in permit gre any host <RRAS_server_public_ip>
access-group outside_access_in in interface outside

0
 

Author Comment

by:shadow2007
ID: 20424643
sorry that did not work
0
 

Author Comment

by:shadow2007
ID: 20424661
I also cant ping the outside interface ip from inside, but i can ping the gateway ip, but i can yahoo and other public ips
0
 

Author Closing Comment

by:shadow2007
ID: 31413018
perfect
0

Featured Post

IT, Stop Being Called Into Every Meeting

Highfive is so simple that setting up every meeting room takes just minutes and every employee will be able to start or join a call from any room with ease. Never be called into a meeting just to get it started again. This is how video conferencing should work!

Join & Write a Comment

This is an article about my experiences with remote access to my clients (so that I may serve them) and eventually to my home office system via Radmin Remote Control. I have been using remote access for over 10 years and have been improving my metho…
PRTG Network Monitor lets you monitor your bandwidth usage, so you know who is using up your bandwidth, and what they're using it for.
Get a first impression of how PRTG looks and learn how it works.   This video is a short introduction to PRTG, as an initial overview or as a quick start for new PRTG users.
Here's a very brief overview of the methods PRTG Network Monitor (https://www.paessler.com/prtg) offers for monitoring bandwidth, to help you decide which methods you´d like to investigate in more detail.  The methods are covered in more detail in o…

759 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

19 Experts available now in Live!

Get 1:1 Help Now