Solved

Configure Cisco 506e firewall for VPN connection

Posted on 2007-12-06
1
198 Views
Last Modified: 2010-04-12
Hello people,
I am going to a site tommorow that is using Cisco PIX506e firewall, i need to open a few ports which i can't imagine being too strenuous but i also have to establish a VPN tunnel back to my office so i can support it remotely. Having no experience of any Cisco equipment thus far in life is this a difficult procedure and are there any good reading documents to help get it configured??
Thanks in advance.
0
Comment
Question by:Sensata
1 Comment
 
LVL 28

Accepted Solution

by:
batry_boy earned 250 total points
ID: 20420628
See the following for configuring the Cisco VPN client software to establish a remote access VPN tunnel to the PIX.

http://www.cisco.com/en/US/products/sw/secursw/ps2308/products_configuration_example09186a00801e71c0.shtml

See the following PDF for how to use the VPN Wizard in the PIX PDM to configure the PIX for remote access VPN use (under "Wizards" on the main page, click on "VPN Wizard" and then click "VPN Wizard Start" and it will walk you through the steps):

http://www.cisco.com/en/US/docs/security/pix/pix63/pdm30/olh/PDF_Version_-_PDM_OLH/pdm304.pdf

As for opening ports, you can find documentation on that in the same PDF mentioned above.  On the main contents page of the above PDF, under "Main Tabs", click "Access Rules" and it will explain about access rules and how to add them.
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

This is an article about my experiences with remote access to my clients (so that I may serve them) and eventually to my home office system via Radmin Remote Control. I have been using remote access for over 10 years and have been improving my metho…
Concerto Cloud Services, a provider of fully managed private, public and hybrid cloud solutions, announced today it was named to the 20 Coolest Cloud Infrastructure Vendors Of The 2017 Cloud  (http://www.concertocloud.com/about/in-the-news/2017/02/0…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Both in life and business – not all partnerships are created equal. As the demand for cloud services increases, so do the number of self-proclaimed cloud partners. Asking the right questions up front in the partnership, will enable both parties …

777 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question