Link to home
Start Free TrialLog in
Avatar of LSB-IT
LSB-IT

asked on

Network Load Balancing Information Stored Where?

We are setting up a citrix environment and want dual web interface servers for redundancy.  We are setting up network load balancing to do this.  I am using the windows network load balancing manager to set this up.  I think I have this setup and working properly.  My question is where is this information for the configuration of the network load balancing stored?  On my machine that did the config or on the 2 servers that I configured for network load balancing?? Maybe active directory??

Thanks
Avatar of Jon Winterburn
Jon Winterburn
Flag of United Kingdom of Great Britain and Northern Ireland image

The NLB registry settings are located at:

HKLM\System\CurrentControlSet\Services\WLBS\Parameters\Interface\{GUID}

Where {GUID} is the GUID of the NIC to which NLB is bound. If you have bound NLB to multiple interfaces, then you will see multiple GUIDs under "Interface".
Avatar of LSB-IT
LSB-IT

ASKER

And is this registry key stored on each of the machines where I am using NLB or is it stored on the machine I used to configure the NLB?
ASKER CERTIFIED SOLUTION
Avatar of Jon Winterburn
Jon Winterburn
Flag of United Kingdom of Great Britain and Northern Ireland image

Link to home
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Start Free Trial
Sorry for posting the link twice - it's Microsoft's framing that makes the two links the same! I was referring to the link at the top of that page entitled "Network Load Balancing Technical Reference"