Google Mini and A Proxy Server

I website is hosted remotely and the google mini sits on our internal
network.  I do not want to give the mini an external IP address adn
make it public to the world.  I would like to put a proxy server in
place in order to handle the requests that come through to the mini.
The problem is, I do not know where to start with setting up a proxy
server.  Can some one please give me directions on how ot set up a
proxy server in our Windows based network?

We do have a DMZ in place and a some servers that are published.

rswaniganAsked:
Who is Participating?
 
Erik BjersConnect With a Mentor Principal Systems AdministratorCommented:
It would be pest to put it on the DMZ then your internal hosts and the outside world would be able to reach it

Also all your published servers should only be in the DMZ dual hoaming them like that can open security holes...

eb
0
 
John Gates, CISSPSecurity ProfessionalCommented:
You have a DMZ so you have a firewall.  Why don't you just create a pinhole rule to allow traffic into the google mini device?

-D-
0
 
Erik BjersPrincipal Systems AdministratorCommented:
Your firewall (please indicate what you have for a firewall) should be able to forward traffic requests on an outside address to your Mini.  To do this setup the Mini in the DMZ with an IP for the DMZ (static not dynamic), then configure NAT or port forwarding on your firewall to forward requests to the Mini.  The steps needed to forward the traffic depend on the firewall.

eb
0
Never miss a deadline with monday.com

The revolutionary project management tool is here!   Plan visually with a single glance and make sure your projects get done.

 
rswaniganAuthor Commented:
We have a PIIX 515E. I believe we have NAT set up already.
0
 
Erik BjersPrincipal Systems AdministratorCommented:
do you have an unused public IP, if so translate it on the pix to the IP of the mini that way it will be reachable from the outside, if you do not have a public IP to spare you can use PAT (port address translation) to forward spacific ports to the mini
0
 
rswaniganAuthor Commented:
Is there a way route traffic to the Mini without putting it on the DMZ?  Our published servers have dual NICs and are plugged into our DMZ and our LAN.  Can it be done through one of those?
0
 
rswaniganAuthor Commented:
OK. We have extra external IP's so I am going to give that a try.
0
 
Erik BjersPrincipal Systems AdministratorCommented:
Good luck do you need help with the PIX config?

eb
0
All Courses

From novice to tech pro — start learning today.