?
Solved

Configuring Callmanager 6

Posted on 2008-01-27
6
Medium Priority
?
4,151 Views
Last Modified: 2010-10-05
Hi,
I have installed a callmanager 6 server. I am looking for step-by-step configuration guide.
I have 10x7960 phones and a 7980 conferancing station. I got a 2811 that I want to use as gateway, it is currently running callmanager express. I have to connect our exchange 2007 to this callmanager and get outlook clients to dial out from the desktop too.

What do I do next? define phones? groups?
0
Comment
Question by:rezakordi
  • 2
3 Comments
 
LVL 22

Accepted Solution

by:
Reid Palmeira earned 2000 total points
ID: 20773825
As far as step by step instructions, that'll depend largely on how you're trying to setup each end station and different groups. In general you can start wherever you'd like. Typically the order I'd start in is

1. WAN and/or PSTN links
2. QoS
3. DID's and extension blocks
4. Endpoint configuration
5. Groups
6. Exchange

cisco has a number of configuration guides online: http://www.cisco.com/en/US/products/sw/voicesw/ps556/tsd_products_support_configure.html

there are examples as well as admin guide that can walk you through step by step.
0
 
LVL 22

Expert Comment

by:Reid Palmeira
ID: 20773829
sorry, one more link: http://www.cisco.com/en/US/products/sw/voicesw/ps556/prod_maintenance_guides_list.html

for the more recent CM 6.0 / 6.1 guides
0
 

Expert Comment

by:womble_stomper
ID: 22838961
When you say configure CUCM6  ....  how deep would you like to go ??

From a phone of view of getting the phones up and working all you should need to do is ....

1: ensure that you have a dhcp server which has option 150 configured pointing it to the CUCM6 server,
2: activate the TFFP server and Call manger service
3: start the TFTP service and call manger service
4: disable the check box for 'auto reg is disabled on this server' ( strange way of wording it )  - it will then ask you to define the extension range that you wish to use for auto assinged extensions

Hope this helps ..... I'm no expert on CUCM6  - But i have managed to build my own and get phones to register with it !!!!

Cheers
0

Featured Post

Free Tool: Subnet Calculator

The subnet calculator helps you design networks by taking an IP address and network mask and returning information such as network, broadcast address, and host range.

One of a set of tools we're offering as a way of saying thank you for being a part of the community.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

What do we know about Legacy Video Conferencing? - Full IT support needed! - Complicated systems at outrageous prices! - Intense training required! Highfive believes we need to embrace a new alternative.
Why do some people recommend buying business VoIP from an ISP? What are the benefits to my company? What are the costs?
Sending a Secure fax is easy with eFax Corporate (http://www.enterprise.efax.com). First, just open a new email message. In the To field, type your recipient's fax number @efaxsend.com. You can even send a secure international fax — just include t…
Internet Business Fax to Email Made Easy - With  eFax Corporate (http://www.enterprise.efax.com), you'll receive a dedicated online fax number, which is used the same way as a typical analog fax number. You'll receive secure faxes in your email, f…
Suggested Courses
Course of the Month6 days, 2 hours left to enroll

589 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question