• Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 243
  • Last Modified:

when ii remote desktop to wondows 2003 r2 i get a 2 computer with x on top right just starting doing this

when i remote desktop to windows server r2 it hangs up and get a picture of 2 pc's with an x on it just started doing this all of sudden
0
kingofqueenz
Asked:
kingofqueenz
  • 3
  • 2
1 Solution
 
Forrest BurrisCommented:
Faulty connection with lots of packet loss? Open up a DOS prompt and ping -t the server. Let it run 50 or so times and see if you get any packet loss. Is the server on your internal network or some wide area network?
0
 
kingofqueenzAuthor Commented:
ping server from wide area network and sent 50 recieved 32 lost 18 36% loss can it be ISP provider?
0
 
kingofqueenzAuthor Commented:
internal getting slow browsing
0
 
Forrest BurrisCommented:
That's bad news, but good news for diagnosing the issue. Even a 5% loss can take a heavy hit on your network. You need to check your internal wiring and network peripherals first. If it's a WAN connection then you can unfortunately only look internally. Some things to try: Make sure your network card's drivers are the most up to date. Replace your CAT5/6 cables to/from your switch/modem/router to your pc and from switch/modem/router to the wall jack or broadband modem. Make sure you're not using a HUB as one of your network peripherals. Toss in another network card and try the connection again. It could also be another number of things.
0
 
kingofqueenzAuthor Commented:
i checked internal network found out to be bad snr on provider side
0

Featured Post

The 14th Annual Expert Award Winners

The results are in! Meet the top members of our 2017 Expert Awards. Congratulations to all who qualified!

  • 3
  • 2
Tackle projects and never again get stuck behind a technical roadblock.
Join Now