• Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 1039
  • Last Modified:

How can I resolve issues coming from error message ID: 113?

I have problems with sending out some messages (SBS2003). Every singe time I restart DNS Server I come up with error messages ID 113 and 7062. Error messaged of ID: 7062 I have sorted out however 113 is still outstanding.

The error message is: The DNS server could not signal the service "NAT". The error was 1168. There  may be interoperability problems between the DNS service and this service.

I wanted to run netdiag.exe however it came back to me with the following message:

The procedure entry point DnsGetPrimaryDomainName_UTF8 could not be located in the dynamic link library DNSAPI.dll.

What shall I do then?
0
jpruchnik
Asked:
jpruchnik
  • 3
  • 3
1 Solution
 
Jeffrey Kane - TechSoEasyPrincipal ConsultantCommented:
You've described the symptom, but not really the problem.  So in order to find out what the problem may be, can you please start by posting a COMPLETE ipconfig /all from your server.

Jeff
TechSoEasy
0
 
jpruchnikAuthor Commented:
Thank you very much for your message. Please find the IPConfig

Windows IP Configuration

   Host Name . . . . . . . . . . . . : SLCT01
   Primary Dns Suffix  . . . . . . . : slct.lan
   Node Type . . . . . . . . . . . . : Unknown
   IP Routing Enabled. . . . . . . . : Yes
   WINS Proxy Enabled. . . . . . . . : Yes
   DNS Suffix Search List. . . . . . : slct.lan

Ethernet adapter Lan:

   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : Broadcom BCM5708C NetXtreme II GigE (NDIS
 VBD Client)
   Physical Address. . . . . . . . . : 00-18-8B-33-C7-BC
   DHCP Enabled. . . . . . . . . . . : No
   IP Address. . . . . . . . . . . . : 192.168.16.2
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . :
   DNS Servers . . . . . . . . . . . : 192.168.16.2
   Primary WINS Server . . . . . . . : 192.168.16.2

Ethernet adapter Wan:

   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : Broadcom BCM5708C NetXtreme II GigE (NDIS
 VBD Client) #2
   Physical Address. . . . . . . . . : 00-18-8B-33-C7-BE
   DHCP Enabled. . . . . . . . . . . : No
   IP Address. . . . . . . . . . . . : 10.250.250.180
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : 10.250.250.1
   DNS Servers . . . . . . . . . . . : 10.250.250.1
                                       158.43.192.1
   Primary WINS Server . . . . . . . : 192.168.16.2
   NetBIOS over Tcpip. . . . . . . . : Disabled

0
 
Jeffrey Kane - TechSoEasyPrincipal ConsultantCommented:
Well there's a very good part of your problem.

Your WAN NIC needs to have the DNS Server set to 192.168.16.2 and then remove the WINS entry.

If your router is providing DHCP, you should also move that to your SBS.  Follow the instructions at the bottom of http://sbsurl.com/dhcp for "Moving the DHCP Server Service to the Computer Running Windows Small Business Server 2003".

Then rerun the Configure Email and Internet Connection Wizard (CEICW -- which is linked as Connect to the Internet in the Server Management Console > To-Do List).  You will put your ISP's DNS Server IP addresses in here so they will be configured as forwarders.

A visual how-to for the CEICW is here:  http://sbsurl.com/ceicw

(rerun the CEICW even if you only are changing the NIC settings).

Jeff
TechSoEasy
0
Get expert help—faster!

Need expert help—fast? Use the Help Bell for personalized assistance getting answers to your important questions.

 
jpruchnikAuthor Commented:
Thank you very much for your message. I wil go through it soon as I see the client. I will keep you updated.
0
 
Jeffrey Kane - TechSoEasyPrincipal ConsultantCommented:
How did this turn out?

Jeff
TechSoEasy
0
 
jpruchnikAuthor Commented:
It did not help much. Actually there will be a server reconfiguration due to some hardware upgrades therefore we will set up the system from scratch.

Thanx for any help.
0

Featured Post

Free Tool: Path Explorer

An intuitive utility to help find the CSS path to UI elements on a webpage. These paths are used frequently in a variety of front-end development and QA automation tasks.

One of a set of tools we're offering as a way of saying thank you for being a part of the community.

  • 3
  • 3
Tackle projects and never again get stuck behind a technical roadblock.
Join Now