Disk size from lsattr

I have EMC disks presented i.e. as shown below.   Unlike other disks, lsattr doesn't show the size of disks.
What the command to view the size of disks?   There are a bunch of EMC disks.  I like to have a script that can return the names of disks with their sizes.

# lsattr -El hdiskpower15
cgname                           Consistency Group Name     True
clr_q         yes                Clear Queue (RS/6000)      True
location                         Location                   True
lun_id        0x47000000000000   LUN ID                     False
lun_reset_spt yes                FC Forced Open LUN         True
max_coalesce  0x20000            Maximum coalesce size      True
max_transfer  0x40000            Maximum transfer size      True
pvid          none               Physical volume identifier False
pvid_takeover yes                Takeover PVIDs from hdisks True
q_err         no                 Use QERR bit               True
q_type        simple             Queue TYPE                 False
queue_depth   16                 Queue DEPTH                True
reassign_to   120                REASSIGN time out value    True
reserve_lock  yes                Reserve device on open     True
rw_timeout    40                 READ/WRITE time out        True
scsi_id       0xe60018           SCSI ID                    False
start_timeout 180                START unit time out        True
ww_name       0x5006048ad52e3f69 World Wide Name            False

# lsattr -El hdisk10
clr_q         yes                Device CLEARS its Queue on error True
location                         Location Label                   True
lun_id        0x3e000000000000   Logical Unit Number ID           False
lun_reset_spt yes                FC Forced Open LUN               True
max_transfer  0x40000            Maximum TRANSFER Size            True
node_name     0x5006048ad52e3f66 FC Node Name                     False
pvid          none               Physical volume identifier       False
q_err         no                 Use QERR bit                     True
q_type        simple             Queue TYPE                       True
queue_depth   16                 Queue DEPTH                      True
reserve_lock  yes                Reserve Device on open           True
rw_timeout    40                 READ/WRITE time out value        True
scsi_id       0xd40018           SCSI ID                          False
start_timeout 180                START UNIT time out value        True
ww_name       0x5006048ad52e3f66 FC World Wide Name               False
ethanjohnsonsAsked:
Who is Participating?
I wear a lot of hats...

"The solutions and answers provided on Experts Exchange have been extremely helpful to me over the last few years. I wear a lot of hats - Developer, Database Administrator, Help Desk, etc., so I know a lot of things but not a lot about one thing. Experts Exchange gives me answers from people who do know a lot about one thing, in a easy to use platform." -Todd S.

sjm_eeCommented:
lspv <hdisk name>
0
ethanjohnsonsAuthor Commented:
I tried, but am getting:

# lspv hdiskpower44
0516-304 : Unable to find device id hdiskpower44 in the Device
        Configuration Database.

# lspv hidsk 70
0516-306 : Unable to find  hidsk in the Device
        Configuration Database.
0
dfkeCommented:
you can try this little script. It will give you information about the physical disks, VG"s, filesystems and free space. Redirect to file.
echo
echo  DISK INFO 
echo
echo  HOSTNAME:      `hostname`
echo  Model:         `uname -M`
echo  Serial number:   `uname -u`
echo  Memory: `lsattr -El sys0 -a realmem| awk '{ print$2 }'` KB
echo 
echo  Date:    `date +%d-%m-%Y`
echo
 
PV=`lspv|awk '{ print $1 }'`
VG=`lsvg`
# List fo physical disks
echo ------ PHYSICAL DISKS ------
lspv
echo
 
#Harddisk type, firmware, ROS level
echo ------ Harddisk type, firmware, ROS level ------  
lsmcode -A | grep hdisk
echo
 
# Paging Space
echo ------ PAGING SPACE ------
lsps -a
echo
 
for i in $VG;do
lv_disk=`lsvg -l $i|awk '{ print $1}'|grep -v $i|grep -v LV`
 
        echo
        echo ------ VOLUME GROUP INFO \($i\) ------
        lsvg $i
        echo
        echo ------ LOGICAL VOLUME NAME \($i\) ------
        lsvg -l $i
        echo
#       echo ------ HDISKS USED FOR \($i/$g\) ------
#       lslv -l $g
#       echo
#       echo ------ FILESYSTEM LAYOUT ON DISKS \($i/$g\) ------
#       lslv -m $g
#       echo
done
 
 
 
for i in $PV;do
        echo
        echo ------ DISK STATISTICS \($i\) ------
        lspv $i
        echo
        echo ------ FILESYSTEMS \($i\) ------
 
# Filesystems per disk
 
        lspv -l $i
        echo
        echo ------ FREE SPACE \($i\) ------
 
# Free space per disk
 
#        lslv -p $i
        lspv -p $i
        echo
done

Open in new window

0

Experts Exchange Solution brought to you by

Your issues matter to us.

Facing a tech roadblock? Get the help and guidance you need from experienced professionals who care. Ask your question anytime, anywhere, with no hassle.

Start your 7-day free trial
cloud5Commented:
If the disk hasn't been assigned a PVID, and if it's not yet part of a volume group, you probably won't be able to do an "lspv".

Instead, try "inq" (you'll need to have installed "EMC.Symmetrix.aix.rte") and "grep" for the name.

For example:

    /usr/lpp/EMC/Symmetrix/bin/inq.aix64_51 | grep hdiskpower44

(you might need to do a "find inq*" to find the inq command)

You should get output similar to this:

    /dev/rhdiskpower44  :DGC     :RAID 5          :0219  :2900003E   :    52428800

The far-right column is the disk capacity of the hdiskpower in kilobytes.
0
It's more than this solution.Get answers and train to solve all your tech problems - anytime, anywhere.Try it for free Edge Out The Competitionfor your dream job with proven skills and certifications.Get started today Stand Outas the employee with proven skills.Start learning today for free Move Your Career Forwardwith certification training in the latest technologies.Start your trial today
Unix OS

From novice to tech pro — start learning today.