NIC Teaming with Linksys SRW2048 48-Port Switch

Morning all,

Anyone know of any limitations with NIC teaming with the Linksys SRW2048 48-Port Switch?

I run two at the moment and am about to buy a dedicated one for my Server Rack - just want to make sure i can Team all my server NIC's without any problems

Thanks
LVL 48
Jay_Jay70Asked:
Who is Participating?
 
from_expConnect With a Mentor Commented:
i don't think there should  be any(based on the manufacturer's documentation).
0
 
from_expCommented:
hi!
if you are also configure each 2 ports on the switch to use 802.3ad (ling aggregation) for each pair of teaming nics, then you have only maximum of 8 possible link aggregations.

if you configure teaming only on the servers(switch configuration left unchanged) then you use any number or servers with teaming nics
0
 
Jay_Jay70Author Commented:
i know the theory behind it :) i just wanted to know if there are any problems with that model switch?
0
 
Jay_Jay70Author Commented:
my thoughts exactly - i have read through it all and just wanted to cover anything i had missed - that'll do :)

Thanks
0
 
Jay_Jay70Author Commented:
Confirmed what i thought :)
0
All Courses

From novice to tech pro — start learning today.