allow port 8100 in and out?

is this the correct config to open port 8100 incoming and outgoing?

PIX Version 6.3(3)
interface ethernet0 auto
interface ethernet1 auto
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password EVPnDGSMGKNp/h2o encrypted
passwd EVPnDGSMGKNp/h2o encrypted
hostname pix
domain-name domain.org
fixup protocol dns maximum-length 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
no fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names        
access-list outside_in permit tcp any any eq smtp
access-list outside_in permit tcp any any eq pcanywhere-data
access-list outside_in permit tcp any any eq www
access-list outside_in permit tcp any any eq 4124
access-list outside_in permit tcp any any eq https
access-list outside_in permit tcp any any eq 8100
pager lines 24
mtu outside 1500
mtu inside 1500
ip address outside 69.*.*.* 255.255.255.248
ip address inside 192.168.1.8 255.255.255.0
ip audit info action alarm
ip audit attack action
pdm location 192.168.1.3 255.255.255.255 inside
pdm location 0.0.0.0 255.255.255.255 inside
pdm location 0.0.0.0 255.255.255.255 outside
pdm location 192.168.1.99 255.255.255.255 inside
pdm location 192.168.1.98 255.255.255.255 inside
pdm location 192.168.1.0 255.255.255.255 inside
pdm logging informational 100
pdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
static (inside,outside) tcp interface smtp 192.168.1.3 smtp netmask 255.255.255.255 0 0
static (inside,outside) tcp interface 5632 192.168.1.98 5632 netmask 255.255.255.255 0 0
static (inside,outside) tcp interface pcanywhere-data 192.168.1.98 pcanywhere-data netmask 255.255.255.255 0 0
static (inside,outside) tcp interface 3001 192.168.1.97 3001 netmask 255.255.255.255 0 0
static (inside,outside) tcp interface 2000 192.168.1.97 2000 netmask 255.255.255.255 0 0
static (inside,outside) tcp interface 2001 192.168.1.97 2001 netmask 255.255.255.255 0 0
static (inside,outside) tcp interface 2002 192.168.1.97 2002 netmask 255.255.255.255 0 0
static (inside,outside) tcp interface 2003 192.168.1.97 2003 netmask 255.255.255.255 0 0
static (inside,outside) tcp interface www 192.168.1.101 www netmask 255.255.255.255 0 0
static (inside,outside) tcp interface 4124 192.168.1.101 4124 netmask 255.255.255.255 0 0
static (inside,outside) tcp interface https 192.168.1.101 https netmask 255.255.255.255 0 0
static (inside,outside) tcp interface 8100 192.168.1.98 8100 netmask 255.255.255.255 0 0
access-group outside_in in interface outside
route outside 0.0.0.0 0.0.0.0 69.*.*.* 1
timeout xlate 0:05:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:00:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
aaa-server LOCAL protocol local
url-server (inside) vendor websense host 192.168.1.99 timeout 5 protocol UDP version 4
filter url http 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0
http server enable
http 192.168.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
telnet 192.168.1.0 255.255.255.255 inside
telnet timeout 5
console timeout 0
dhcpd address 192.168.1.9-192.168.1.254 inside
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd auto_config outside
terminal width 80
Cryptochecksum:1a04bbe450c2e5d1cb195ba1852fd1e4
: end
LVL 3
adamshieldsAsked:
Who is Participating?
I wear a lot of hats...

"The solutions and answers provided on Experts Exchange have been extremely helpful to me over the last few years. I wear a lot of hats - Developer, Database Administrator, Help Desk, etc., so I know a lot of things but not a lot about one thing. Experts Exchange gives me answers from people who do know a lot about one thing, in a easy to use platform." -Todd S.

from_expCommented:
hi!
if the host 192.168.1.98 serves this port, then settings are correct.
if 192.168.1.98 is windows xp/2003 don't forget to open 8100 port in windows firewall
0
adamshieldsAuthor Commented:
how can i test the internal server port through telnet?
0
from_expCommented:
telnet 192.168.1.98 8100
0

Experts Exchange Solution brought to you by

Your issues matter to us.

Facing a tech roadblock? Get the help and guidance you need from experienced professionals who care. Ask your question anytime, anywhere, with no hassle.

Start your 7-day free trial
It's more than this solution.Get answers and train to solve all your tech problems - anytime, anywhere.Try it for free Edge Out The Competitionfor your dream job with proven skills and certifications.Get started today Stand Outas the employee with proven skills.Start learning today for free Move Your Career Forwardwith certification training in the latest technologies.Start your trial today
Cisco

From novice to tech pro — start learning today.