[Webinar] Streamline your web hosting managementRegister Today

  • Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 681
  • Last Modified:

cisco firewall clientless vpn

i have a new firewall a cisco asa 5510 series adaptive security appliance. They said tehy want clientless vpn how is this setup and configured?
1 Solution
Clientless VPN is another name for SSL VPN or what Cisco called WebVPN.  Here is an article with examples you may find helpful:
I used that guide myself when I setup the webvpn. A few things to note and be carefull of.

1) With normal cisco client VPN the IP address pool is a pool of IP addresses which are on a separate logical network than the ip addresses used internally. In this example they are using IP addresses within the inside interface IP range.

2) If you create your own tunnel group and group policy then you have to add an alias for your group policy and enable the user to select the group policy in the webvpn options. Otherwise the unconfigured default is always used and never the one you created.

3) I have to add a nat exclusion for the IP address pool I was using even though I followed the example and used IP addresses beonging to the inside interface IP range. The cisco example did not show this.

Featured Post

SMB Security Just Got a Layer Stronger

WatchGuard acquires Percipient Networks to extend protection to the DNS layer, further increasing the value of Total Security Suite.  Learn more about what this means for you and how you can improve your security with WatchGuard today!

Tackle projects and never again get stuck behind a technical roadblock.
Join Now