Creating a VPN with NAT on TZ170 with Standard OS

I'm in the process of setting up a VPN to a consulting company. I only want to allow them access to 1 machine which currently resides on our network with an address of 192.168.1.50.  Other computers on our local network also need to access this machine.  

I've got the VPN policy created, but I'm wondering if it's possible to NAT the address of the local machine and only allow the VPN tunnel access to that NAT address or subnet.  Is this possible without upgrading to Sonicwall OS Enhanced?
themodusoperandiAsked:
Who is Participating?
 
themodusoperandiConnect With a Mentor Author Commented:
I've gone through everything and it doesn't looks like that functionality is built into the Standard OS.  
0
 
JFrederick29Commented:
You will need to NAT 192.168.1.50 to a different address than your Sonicwall public IP and then you can specify only the 192.168.1.50 NAT address in the VPN policy.  I would hope you don't need the Enhanced OS to do that.
0
All Courses

From novice to tech pro — start learning today.