Emachine t3830 no power up

Have emachine t3830, power supply short cicuted, installed new power supply antec bp350, now have green light on motherboard, still no power no fans nothing but green light, noticed that new power supply does not have -5 volt wire (white ) is this needed for the seeebreeze t3. Everything else the same, also is this worth putting any money into?
Who is Participating?
nobusConnect With a Mentor Commented:
>>   -5 volt   <<  not used anymore
>>  is this worth putting any money into?  <<   depends ; try booting with the minimum :
mobo + cpu + 1 ram stick, video card, PS  --> any display?  if NO, it is one of the connected, if Y add devoices till the problem shows
btw - what is "the seeebreeze t3" ?
Jingram82Connect With a Mentor Commented:
If you replaced the power supply and the unit still doesn't power on, try to manually short the to pins that the power button connects too.  This will power on the PC if the problem is that the power switch was broken.

If that doesn't work, the Motherboard is bad.
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

All Courses

From novice to tech pro — start learning today.