Link to home
Start Free TrialLog in
Avatar of JPFN
JPFN

asked on

Problems with port forwarding for SBS Mobile SSL

The Server is HP Prolient ML110 with SBS 2003 R2 Standard edition with Exchange SP2 but no ISA and one network card with a fixed IP address.  There is one Netgear DG834 v2 ADSL router which connects to the Internet port of a Netgear FVS 318. (version unknown)
The network PCs as well as the server connect to this Firewall / switch.  
So far I have set up port forwarding between both routers and the server for both Terminal Server and SSL of which only Terminal server works. I can connect to the server OMA web page on the local network which seems to suggest that the Internet connection wizard is doing its job. However, despite having enabled everything nothing can connect from the outside except remote terminal clients.
I suspect a problem with the SSL port forwarding and was wondering if this is a known problem with a straight forwarded solution.

-JPFN
ASKER CERTIFIED SOLUTION
Avatar of Celteh
Celteh

Link to home
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Start Free Trial
Avatar of JPFN
JPFN

ASKER

Hi Celteh
I guess I just needed to step away from the problem for a day or two. Looks like I screwed up on the settings. I just re-set everything and started again and it works fine.
Thanks again
JPFN