Link to home
Create AccountLog in
Avatar of fnbgppl
fnbgppl

asked on

issues routing to third party network

Trying to connect to a third party domain through a cisco router.  One machine works others work sometimes and not other times.
Network information: ip of destination server is 10.165.2.1; mask 255.255.255.255; internal port of router is 192.168.1.250.  My WAN is 192.168.x.x.  My routers 192.168.1.a and 192.168.1.b both have routes in them of 10.165.2.1/32 [1/0] via 192.168.1.250. All machines, working and not, ip of 192.168.1.x, and default gateway of 192.168.1.a
The one machine that is currently working is connected through my lan.  I have connected the third party router into a small switch that is connected to my lan switch as well as a laptop.  The laptop that is connected to the small switch works sometimes.
command results:
working machine on lan: ping 192.168.1.250 good; tracert 10.165.2.1: 192.168.1.a; 192.168.1.250; 192.168.113.1; 10.255.165.254; 10.165.2.1.
machine on small switch: ping 192.168.1.250 good; tracert 10.165.2.1: 192.168.1.a; 192.168.1.250; then times out. or sometimes works.
other machine on lan: ping 192.168.1.250 good; tracert 10.165.2.1: 192.168.1.a; 192.168.1.250; then times out. or sometimes works.
All three computers have the same settings.
Any help with this would be greatly appreciated.
Avatar of fnbgppl
fnbgppl

ASKER

I tried flushing the dns on a machine (ipconfig /flushdns; inconfig /registerdns) Now I am recieving this for tracert 10.165.2.1: 192.168.1.a; 192.168/113.1.  It has skipped a hop.
Avatar of fnbgppl

ASKER

After pinging 192.168.1.250, and viewing routes on the pc I had flushed, it is now back to the same tracert 10.165.2.1: 192.168.1.a; 192.168.1.250; where it then times out for the rest of the 30 hops.
ASKER CERTIFIED SOLUTION
Avatar of fnbgppl
fnbgppl

Link to home
membership
Create an account to see this answer
Signing up is free. No credit card required.
Create Account