Link to home
Start Free TrialLog in
Avatar of randdv8
randdv8

asked on

PIX VPN subnet/access problem. Config cleanup asistance needed.

We have a PIX setup that's working great.  VPN connects, but I can only access a portion of the network.  My feeling is that it's a subnet issue, but I'm not familiar with the command line verbiage.  Here's the snippet of the config where I think the problem lies:

access-list Client-Traffic permit ip 192.168.0.0 255.255.255.0 172.16.12.0 255.2
55.255.0
access-list NoNAT permit ip 192.168.0.0 255.255.255.0 172.16.12.0 255.255.255.0
pager lines 24

My feeling is that there is a return between the first and second line where there shouldn't be, and it's limiting my access to my entire subnet.  How can I clean this up?
ASKER CERTIFIED SOLUTION
Avatar of batry_boy
batry_boy
Flag of United States of America image

Link to home
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Start Free Trial
Avatar of randdv8
randdv8

ASKER

Turns out it was a misconfiguration on the client side.  The VPN and routing are and were working fine.  Thanks for jumping in.