Link to home
Get AccessLog in
Avatar of shanraj
shanraj

asked on

Configuring IPMI on DL140 G2

Hi,

I have a proliant DL140 G2 box installed with SLES 10. I want to configure IPMI on that machine and access remotely. Is there any help / guide for that..?

Thanks in advance.
Avatar of noci
noci

It's called Lights-Out 100. Here's the HP config and admin guide:
http://bizsupport.austin.hp.com/bc/docs/support/SupportManual/c00293062/c00293062.pdf

You can configure it via serial or web browser (IP acquired via DHCP should be viewable in system bios).
Avatar of shanraj

ASKER

Hi,

I have all these packages downloaded & dumped in my system. I do not have any installation guide which can explaing me step by step to enable and access my IPMI enabled system.

I have a package called IPMIView from Super Micro. Even this utility is not detecting my IPMI based system. :(

Please help me.
ASKER CERTIFIED SOLUTION
Avatar of noci
noci

Link to home
membership
This content is only available to members.
To access this content, you must be a member of Experts Exchange.
Get Access