<div>
Pull the CMOS Battery and pull your Power Cords this will reset the BIOS..
</div>


Pull the CMOS Battery and pull your Power Cords this will reset the BIOS..

<div>
Also verify that your original memory is seated properly, the memory may have come loose when you seated or pulled the other memory.
</div>


Also verify that your original memory is seated properly, the memory may have come loose when you seated or pulled the other memory.

<div>
Forced accept.<br />
<br />
Computer101<br />
EE Admin
</div>


<div>
<div class="content wysiwyg-content">
I ADDED A 2 GB MEMORY ON A HP COMPAQ ML 350 SERVER RUNNING WINDOWS 2003 STANDARD EDITION. PRVIOUS MEMORY CONFIG. IS 512 MB ON INTERLEAVED MODE. AFTER RESTARTING, I GOT THE ERROR MESSAGE AND PULLING BACK THE ADDED MEMORY DOES NOT REMOVE THE ERROR MESSAGE ANYMORE.
</div>
</div>


I ADDED A 2 GB MEMORY ON A HP COMPAQ ML 350 SERVER RUNNING WINDOWS 2003 STANDARD EDITION. PRVIOUS MEMORY CONFIG. IS 512 MB ON INTERLEAVED MODE. AFTER RESTARTING, I GOT THE ERROR MESSAGE AND PULLING BACK THE ADDED MEMORY DOES NOT REMOVE THE ERROR MESSAGE ANYMORE.

HARDWARE MALFUNCTIONS  CONTACT YOUR VENDOR NMI:  PARITY CHECK/MEMORY PARITY ERROR= THE SYSTEM HAS HALTED

The Microsoft Legacy Operating System topic includes legacy versions of Microsoft operating systems prior to Windows 2000: All versions of MS-DOS and other versions developed for specific manufacturers and Windows 3/3.1, Windows 95 and Windows 98, plus any other Windows-related versions, and Windows Mobile.

Microsoft Legacy OS

Servers are computing devices that are similar to desktop computers in that they have the same basic components, but are significantly different in size, configuration and purpose. Servers are usually accessed over a network, and many run unattended, without a computer monitor, input device, audio hardware or USB interfaces. Many servers do not have a graphical user interface (GUI), and are configured and managed remotely. Servers typically include hardware redundancy such as dual power supplies, RAID disk systems, and ECC memory, along with extensive pre-boot memory testing and verification. Critical components might be hot swappable, and to guard against overheating, servers might have more powerful fans or use water cooling.