rayfidelity
asked on
Ubuntu network very slow
Hi,
I've been having network issues in ubuntu for 2 weeks now...the network works fine for some time (from 2 min to a few hours) then it becomes very slow...transfer speeds on LAN are 10kb/s!!!
Ping delay www.google.com is 999ms!!! the router delay is 690ms (from computer to router)!!!
the network works fine on al other (windows) computers, the ping from router console to www.google.com is 60ms...and the ping from router to the comp is also 999ms
ping from windows computer to the router is 1ms!
I'm using wired network, i've tried both, dhcp and static config it both works only for some time...then it becomes very slow
The router is Linksys with tomato 1.17
I've been having network issues in ubuntu for 2 weeks now...the network works fine for some time (from 2 min to a few hours) then it becomes very slow...transfer speeds on LAN are 10kb/s!!!
Ping delay www.google.com is 999ms!!! the router delay is 690ms (from computer to router)!!!
the network works fine on al other (windows) computers, the ping from router console to www.google.com is 60ms...and the ping from router to the comp is also 999ms
ping from windows computer to the router is 1ms!
I'm using wired network, i've tried both, dhcp and static config it both works only for some time...then it becomes very slow
The router is Linksys with tomato 1.17
ASKER CERTIFIED SOLUTION
membership
Create a free account to see this answer
Signing up is free and takes 30 seconds. No credit card required.
Try to change the switch port you are using for that computer
Could be a duplex mis-match. What nic speed and duplex setting are you getting on the NIC and switch port....
ASKER
i've already tried changing the port on the switch and the cable is currently plugged into diffent port, but the problems are still here...
Supported ports: [ TP ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Half 1000baseT/Full
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Half 1000baseT/Full
Advertised auto-negotiation: Yes
Speed: 100Mb/s
Duplex: Full
Port: Twisted Pair
PHYAD: 0
Transceiver: internal
Auto-negotiation: on
Supports Wake-on: pg
Wake-on: d
Current message level: 0x000000ff (255)
Link detected: yes
Supported ports: [ TP ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Half 1000baseT/Full
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Half 1000baseT/Full
Advertised auto-negotiation: Yes
Speed: 100Mb/s
Duplex: Full
Port: Twisted Pair
PHYAD: 0
Transceiver: internal
Auto-negotiation: on
Supports Wake-on: pg
Wake-on: d
Current message level: 0x000000ff (255)
Link detected: yes
ASKER
You were right, i plugged the cable into the second nic and it's working...
thx for accepting my answer..however next time when you get a correct answer that solves your problem please assign an A :)
thx again
thx again
ASKER