NeoLuddite
asked on
IBM ServeRAID compatibilty with Netware 5.1
Attempting to install Netware 5.1 on an IBM xseries 3650 with a ServeRAID 8K "0 slot" SAS controller. Firmware and drivers are version 8.4
Tried various versions of IPSRAID and AACRAID HAM & DDI, all to no avail, regardless of the controller slot number specified (choices are 10023, 10024, 10025). Boot display shows SCSI controller in PCI slot 4 (?)
Beginning to suspect that NW 5.1 isn't going to be do-able on this hardware - wondering if anyone has successfully implemented this combination and if so , how? TIA
Tried various versions of IPSRAID and AACRAID HAM & DDI, all to no avail, regardless of the controller slot number specified (choices are 10023, 10024, 10025). Boot display shows SCSI controller in PCI slot 4 (?)
Beginning to suspect that NW 5.1 isn't going to be do-able on this hardware - wondering if anyone has successfully implemented this combination and if so , how? TIA
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Actually, my Comment was a query. Do you really expect 8-year-old NOS drivers to work with the still-wet-new hardware?
Force accepted.
modus_operandi
EE Moderator
modus_operandi
EE Moderator
Force accepted.
Vee_Mod
Experts Exchange Moderator
Vee_Mod
Experts Exchange Moderator
ASKER