Solved

Creating a Site to Site VPN between Watchguard Firebox X and ISA 2006

Posted on 2008-06-09
7
1,022 Views
Last Modified: 2012-05-05
I have created the VPN endpoints to use the same same settings on each side on the site to site VPN tunnel. One end uses Firebox X and the other ISA 2006. A Tunnel will not create. Insight would be be helpful.

Thanks In advance.
0
Comment
Question by:jlycos1
  • 2
  • 2
7 Comments
 
LVL 32

Expert Comment

by:dpk_wal
ID: 21748446
Can you post some logs from the traffic monitor which might help deduce what is not matching between the ends; if the settings are identical at both ends then the VPN tunnel would come up; please check if there is any firewall on ISA which might be blocking the traffic.

Please update with logs.

Thank you.
0
 
LVL 1

Author Comment

by:jlycos1
ID: 21771754
I now have the SITE to Site vpn cut but am unable to route the traffic to a terminal server on a seperate subnet behind that ISA server. I am able to use a Microsft VPN connection to that subnet though.

Thanks in advance...
0
 
LVL 1

Author Comment

by:jlycos1
ID: 21772493
I think I have it up...
0
 
LVL 32

Expert Comment

by:dpk_wal
ID: 21775537
Good to know that the problem is resolved! :)
0
 
LVL 1

Accepted Solution

by:
Computer101 earned 0 total points
ID: 22506925
PAQed with points refunded (250)

Computer101
EE Admin
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

So the following errors occurs in 2 ways that I am aware of at this stage, and you receive one of the following error messages: ERROR 1. When trying to save a rule: No Web listener is specified for the Web publishing rule Autodiscovery Publishin…
If you use NetMotion Mobility on your PC and plan to upgrade to Windows 10, it may not work unless you take these steps.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

832 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question