Solved

Entend maximum time of one VPN connection session

Posted on 2008-06-09
1
324 Views
Last Modified: 2010-04-12
Hey experts,

I am using Cisco VPN Client, and I am always getting disconnected after 4 hours.
Is there anyway for me to do to keep the connection time longer?

As I understand, there are two types of Time-Out set for a VPN user session,
Idle-Timeout (e.g.0.5 hr) and Maximum Session-Timeout (4 hr in my case).  
What I want to solve is the latter one.  

Do you have good suggestion on that?

Thanks
0
Comment
Question by:Chelsey08
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
1 Comment
 
LVL 78

Accepted Solution

by:
arnold earned 500 total points
ID: 21746212
You have to check what the settings are on the ASA to which you are presumably connecting.  It could be configured to only allow a 4 hour connection.
0

Featured Post

Is your NGFW recommended by NSS Labs?

Ours is! NSS Labs Next Generation Firewall Test gives the WatchGuard Firebox M4600 a "Recommended" rating! Curious where your NGFW landed on the  Security Value Map? See the map and download the full report today!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

One of the Top 10  common Cisco VPN problems are not-matching shared keys. This is an easy one to fix, but not always easy to notice, see the case below. A simple IPsec tunnel between fast Ethernet interfaces of routers SW1 (f1/1) and R1(f0/0). …
Juniper VPN devices are a popular alternative to using Cisco products. Last year I needed to set up an international site-to-site VPN over the Internet, but the client had high security requirements -- FIPS 140. What and Why of FIPS 140 Federa…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

724 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question