Solved

Secondary VPN authentication

Posted on 2008-06-10
1
264 Views
Last Modified: 2012-05-05
Hi All,

I would like to add extra security to our RRAS VPN. I'm wondering is there a way for extra authentication layer. I would like to avoid solutions we would have to pay for, like SecurID etc.

is there anything build in within RRAS we could use?

Thanks,
0
Comment
Question by:dannydudek
1 Comment
 
LVL 28

Accepted Solution

by:
jhyiesla earned 125 total points
ID: 21750183
Probably not to the extent that you would really want. If you are running an an Active Directory environment you can limit who can gain access by username. You can also write an access rule that restricts by such things as time of day. But there's really no facility to do real second level authentication.  You can have authentication take place with a radius server.  I've not used Radius so I can't comment on what features that might add to the mix.

Even though it would cost some money, you might want to look into a Grid Card system like from Entrust. It supposedly does a good job and is supposed to be much less expensive than a token system like SecureID.
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Do you have an old router lying around the house that you don’t know what to do with? Check the make and model, then refer to either of these links to see if its compatible. http://www.dd-wrt.com/site/support/router-database http://www.dd-wrt.c…
Like many others, when I created a Windows 2008 RRAS VPN server, I connected via PPTP, and still do, but there are problems that can arise from solely using PPTP.  One particular problem was that the CFO of the company used a Virgin Broadband Wirele…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

777 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question