asked on

How to edit the access list in PIX ?

Hi Experts,

I'm new and I need the step by step guide to change following entery in the PX 501.

I need to change line 5 and give a diferent IP address.
######################################################################
static (inside,outside) tcp xx.xxx.xxx.xxx smtp 192.168.1.10 smtp netmask 255.2
5.255.255 0 0
static (inside,outside) tcp xx.xxx.xxx.xxx www 192.168.1.10 www netmask 255.255
255.255 0 0
static (inside,outside) tcp xx.xxx.xxx.xxx https 192.168.1.10 https netmask 255
255.255.255 0 0
static (inside,outside) tcp xx.xxx.xxx.xxx 3389 192.168.1.10 3389 netmask 255.2
5.255.255 0 0
static (inside,outside) tcp xx.xxx.xxx.xxx www 192.168.1.34 www netmask 255.255
255.255 0 0
static (inside,outside) tcp xx.xxx.xxx.xxx https 192.168.1.34 https netmask 255
255.255.255 0 0
static (inside,outside) tcp xx.xxx.xxx.xxx 3389 192.168.1.34 3389 netmask 255.2
5.255.255 0 0
######################################################################
Please help.

DSE IT-Services

first copy the line that you want to changes then type: no (paste the copied line) this will remove the line. Paste your line again and change the line in what is should be. press enter and your done.

NetMaxtor

ASKER

I need the steps from the login to the router ??? with the commands and all..

Thank !

DSE IT-Services

Do you know how you can connect to the PIX? Can you use telnet or can you use an Internet Browser or can you connect through the blue console cable?

NetMaxtor

ASKER

i'm connecting from the blue console cable...

ASKER CERTIFIED SOLUTION

DSE IT-Services

membership

Create a free account to see this answer

Signing up is free and takes 30 seconds. No credit card required.

See answer