?
Solved

Need to make changes to extended ACL

Posted on 2008-06-10
4
Medium Priority
?
334 Views
Last Modified: 2010-04-21
I have an extended IP access list that in the middle I need to change the access list and add a line to allow a port to be open

 650 permit tcp any host 208.xx.xxx.175 eq 3389 (25 matches)
 660 permit tcp any host 208.xx.xxx.175 eq www (104 matches)
 670 deny ip any host 208.xx.xxx.175 (2492 matches)

I need to add permit tcp any hosts 208.xx.xxx.175 eq 8080
0
Comment
Question by:DarITeam
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 2
  • 2
4 Comments
 
LVL 43

Expert Comment

by:JFrederick29
ID: 21750924
You can insert with line numbers:

conf t
ip access-list extended <name>
665 permit tcp any host 208.xx.xxx.175 eq 8080
0
 

Author Comment

by:DarITeam
ID: 21751103
I thought I could only go in increments of 10?
0
 
LVL 43

Accepted Solution

by:
JFrederick29 earned 1500 total points
ID: 21751207
Nope, you can increment by 1 if you like...661, 662, etc...
0
 

Author Closing Comment

by:DarITeam
ID: 31465720
Thanks
0

Featured Post

Four New Appliances. Same Industry-leading Speeds.

But don't take it from us.  The Firebox M370 is Miercom tested and Miercom approved, outperforming its competitors for stateless and stateful traffic throughput scenarios.  Learn more about the M370, M470, M570 and M670 and find the right solution for your organization today!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Hello All, I have been training on Multicast for a while now and whenever I start the topic , I find out that my friends /  Colleagues mention that they do not know how to test Multicast Joins. As most of the multicast would be video traffic and …
Arrow Electronics was searching for a KVM  (Keyboard/Video/Mouse) switch that could display on one single monitor the current status of all units being tested on the rack.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Suggested Courses
Course of the Month12 days, 23 hours left to enroll

777 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question