?
Solved

CISCO - ping / resolve internal IP from external network,

Posted on 2008-06-10
3
Medium Priority
?
583 Views
Last Modified: 2010-05-18
BT IP converge
private network.
Cisco config

Hello experts.
We have a number of sites around the UK that have connectivity back to us via an IP converge connection. I'm sending out new routers and they are working fine, but I can only access them via their DHCP address that I have to pull from Steelbelt radius. - is there a way to configure the routers to that the static IP address (internal) is visible / accessable over the IP converge Network?

example:
main office Internal IP    -----> external IP -------- IP converge -------> externalIP --- internal IP Site
Main office 192.168.10.1 ---> 192.168.14.1 ----- IP CONVERGE ----> 192.168.14.2 -- 192.168.32.1

From the main network, I want to be able to ping. telnet the internal IP for t he site.
on some of the older routers we have out on sites, this works fine.. its only the new ones its an issue

many thanks
Dave
0
Comment
Question by:hb21l6
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 2
3 Comments
 
LVL 5

Expert Comment

by:rslqld
ID: 21756019
You could setup your own VPN or approach your provider for an MPLS-VPN private IP solution.
0
 
LVL 2

Author Comment

by:hb21l6
ID: 21757507
it already is a private VPN solution (BT's IP converge)
There is a way to make a cisco routers internal IP be visible externally, I'm just not sure how to do it.

thanks anyway

Dave
0
 
LVL 2

Accepted Solution

by:
hb21l6 earned 0 total points
ID: 21758398
after some research, i just need to add a loopback for the interface Ip.
0

Featured Post

What does it mean to be "Always On"?

Is your cloud always on? With an Always On cloud you won't have to worry about downtime for maintenance or software application code updates, ensuring that your bottom line isn't affected.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

In the hope of saving someone else's sanity... About a year ago we bought a Cisco 1921 router with two ADSL/VDSL EHWIC cards to load balance local network traffic over the two broadband lines we have, but we couldn't get the routing to work consi…
I recently attended Cisco Live! in Las Vegas, a conference that boasted over 28,000 techies in attendance, and a week of hands-on learning hosted by a solid partner with which Concerto goes to market.  Every year, Cisco displays cutting-edge technol…
Here's a very brief overview of the methods PRTG Network Monitor (https://www.paessler.com/prtg) offers for monitoring bandwidth, to help you decide which methods you´d like to investigate in more detail.  The methods are covered in more detail in o…
Monitoring a network: how to monitor network services and why? Michael Kulchisky, MCSE, MCSA, MCP, VTSP, VSP, CCSP outlines the philosophy behind service monitoring and why a handshake validation is critical in network monitoring. Software utilized …

777 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question