Solved

hp deskjet 460 how to change ink cartridge

Posted on 2008-06-11
2
2,129 Views
Last Modified: 2013-12-15
do you know how to change ink cartridge of HP deskjet 460?
0
Comment
Question by:Hiroyuki Tamura
2 Comments
 
LVL 3

Accepted Solution

by:
callmecheez earned 125 total points
ID: 21760359
- With the printer turned on, open the front access cover. Wait for the carriage to stop moving. This
should take only a few seconds.

- .Lift the print cartridge latch open and gently remove the print cartridge from its cradle compartment.

- Insert the new print cartridge into its cradle compartment at the same angle at which you removed the
old print cartridge. Check the number on the latch against the number on the print cartridge to make
sure you are inserting the correct print cartridge.

- Close the print cartridge latch. If the cartridge is inserted correctly, closing the latch gently pushes the
cartridge into its cradle compartment. Press the latch to make sure it is seated flat on the cartridge.

-. Close the front access cover.

-. Wait for the carriage to complete the print cartridge initialization routine and return to the home
position at the left side of the printer before using the printer.



(see manual here:
http://h10032.www1.hp.com/ctg/Manual/c00494540.pdf)
0
 

Author Closing Comment

by:Hiroyuki Tamura
ID: 31466167
thank you.
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

If you use a Brother DCP 130C or similar Brother printer, at some point you might encounter the following problem: after you change the ink cartridge, the printer displays an "ink empty" message. Sometimes you just need to follow the instructions…
Printers have changed substantially in the last 30 or so years, not just in technical capabilities but in cost and usage as well.  Printers were originally used for interfacing with the operator, not necessarily for printing copy or pictures. In …
In an interesting question (https://www.experts-exchange.com/questions/29008360/) here at Experts Exchange, a member asked how to split a single image into multiple images. The primary usage for this is to place many photographs on a flatbed scanner…

839 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question