[2 days left] What’s wrong with your cloud strategy? Learn why multicloud solutions matter with Nimble Storage.Register Now

x
?
Solved

Access to local subnets inaccessible when connecting to outside VPN server.

Posted on 2008-06-11
1
Medium Priority
?
240 Views
Last Modified: 2010-04-12
SETUP:
LOCAL OS: Windows XP Professional (SP2)
VPN CLIENT: CHECKPOINT VPN CLIENT

PROBLEM:
WHEN TUNNELED TO REMOTE CHECKPOINT VPN SERVER, CAN ACCESS REMOTE LAN WITHOUT A PROBLEM, HOWEVER I CAN ONLY ACCESS OUR LOCAL 192.168.1.0/24 VLAN. CANNOT ACCESS LOCAL172.21.1.0/24 VLAN. ipconfig shows (as it should): Remote IP, subnet and gateway assigned from remote VPN server.

WHAT IS NEEDED:
I WOULD LIKE TO ACCESS MY LOCAL SERVER ON THE LOCAL 172.21.1.0/24 VLAN (I can when not connected to VPN), WHILE CONNECTED TO REMOTE VPN.
0
Comment
Question by:supercell29
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
1 Comment
 
LVL 29

Accepted Solution

by:
Michael Worsham earned 1000 total points
ID: 21761231
The Checkpoint VPN client needs to be allowed to enable split tunneling to allow for this to happen. However, the split tunnel configuration is usually handled by the VPN server not the client, so you can't just override it.
0

Featured Post

Cyber Threats to Small Businesses (Part 1)

This past May, Webroot surveyed more than 600 IT decision-makers at medium-sized companies to see how these small businesses perceived new threats facing their organizations.  Read what Webroot CISO, Gary Hayslip, has to say about the survey in part 1 of this 2-part blog series.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

In the hope of saving someone else's sanity... About a year ago we bought a Cisco 1921 router with two ADSL/VDSL EHWIC cards to load balance local network traffic over the two broadband lines we have, but we couldn't get the routing to work consi…
In this article, we’ll look at how to deploy ProxySQL.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Windows 10 is mostly good. However the one thing that annoys me is how many clicks you have to do to dial a VPN connection. You have to go to settings from the start menu, (2 clicks), Network and Internet (1 click), Click VPN (another click) then fi…

649 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question