Solved

Win 2000 Server Stop Error at Boot up

Posted on 2008-06-11
2
489 Views
Last Modified: 2013-12-05
Hello everyone,
A major storm in the NYC area caused a power outage overnight.  This morning I attempted to boot up a Win 2000 Server without success.  I received the following message about 3/4 of the way through the WIN 2000 Server splash screen:
_______________
Stop: 0X0000007B (0X85CF7630, OXC0000032, 0X00000000, 0X00000000) INACCESIBLE_BOOT_DEVICE
If this is the first time you received this error, restart your computer...
Check for viruses on your computer.  Remove any newly installed hard drives or hard drive controllers.  Check your hard drive to make sure it is properply configured and terminated.  Run CHKDSK /F to check for hard drive corruption, and then restart your computer .
________________________
Additional Information:
The server is a Dell Poweredge 2600, RAID 5, 3 x 30GB SCSI Drives
1 Logical and 0 physical drives identified


Here is what i tried so far:
F10 - Utility Partition - CTRL + M - PERC/CERC BIOS Configuration Utility - Ran Consistency Check
F10 - WEB BIOS - CTRL - H - Scan Devices (all indicate: ON STATE)
Attempted to run Repair - via Windows 2000 setup, however setup did not find any hard disks installed
Attempted to load last know good configuration, but received the same result - blue screen

Any advice would help. thanks
len

0
Comment
Question by:aneuman2930
2 Comments
 
LVL 3

Accepted Solution

by:
superiz earned 500 total points
Comment Utility
Usually, running checkdisk (chkdsk.exe) on the volume will correct the problem. You need to put the storage driver for your machine onto a diskette, and then press F6 at the beginning of the setup CD boot process (when it prompt to "Press F6 for additional mass storage controllers"). You can then use the recovery console to run checkdisk (chkdsk).
0
 

Author Closing Comment

by:aneuman2930
Comment Utility
Superiz thanks so much.  Worked great
0

Featured Post

Highfive Gives IT Their Time Back

Highfive is so simple that setting up every meeting room takes just minutes and every employee will be able to start or join a call from any room with ease. Never be called into a meeting just to get it started again. This is how video conferencing should work!

Join & Write a Comment

Welcome to my series of short tips on migrations. Whilst based on Microsoft migrations the same principles can be applied to any type of migration. My first tip Migration Tip #1 – Source Server Health can be found listed in my profile here: http:…
Every server (virtual or physical) needs a console: and the console can be provided through hardware directly connected, software for remote connections, local connections, through a KVM, etc. This document explains the different types of consol…
This video gives you a great overview about bandwidth monitoring with SNMP and WMI with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're looking for how to monitor bandwidth using netflow or packet s…
Polish reports in Access so they look terrific. Take yourself to another level. Equations, Back Color, Alternate Back Color. Write easy VBA Code. Tighten space to use less pages. Launch report from a menu, considering criteria only when it is filled…

743 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

17 Experts available now in Live!

Get 1:1 Help Now