Solved

Cisco Simulator

Posted on 2008-06-11
6
336 Views
Last Modified: 2010-04-21
Dear All,

I need please to download a free simulator that help me to make some real training on how to configure a CISCO router.

Thanks for help
0
Comment
Question by:michofreiha
  • 3
  • 3
6 Comments
 
LVL 23

Expert Comment

by:that1guy15
ID: 21764280
GNS3 will be your best bet.

http://www.gns3.net/

here is also a link with a lot of good tutorials on using GNS3
http://www.blindhog.net/
0
 
LVL 9

Author Comment

by:michofreiha
ID: 21764402
that1guy15, Can you provide me a tutorial about how using this software and a CISCO lab that I can make?
0
 
LVL 23

Expert Comment

by:that1guy15
ID: 21764438
The software is pretty straight forward to install. The only down side to GNS3 is you will need your own IOS's. Here is a good getting started tutorial from BlindHog.net that shows the basics of GNS3.

http://www.blindhog.net/cisco-gns3-graphical-router-emulation-software/

Check out all the other tutorials from blind hog to get some good ideas for labs. Dig through the post for both GNS3 and Dynamips.


Oh and by the way GNS3 is free.

0
Connect further...control easier

With the ATEN CE624, you can now enjoy a high-quality visual experience powered by HDBaseT technology and the convenience of a single Cat6 cable to transmit uncompressed video with zero latency and multi-streaming for dual-view applications where remote access is required.

 
LVL 9

Author Comment

by:michofreiha
ID: 21764477
One last question...I don't know how to get an IOS image...Can you help in that please?
0
 
LVL 23

Accepted Solution

by:
that1guy15 earned 500 total points
ID: 21764499
That is an area that i cant help you out with here on EE. But i will tell you the blindhog site has a post that talks about the subject.

Google might be able to help you too
0
 
LVL 9

Author Closing Comment

by:michofreiha
ID: 31466359
thanks a lot
0

Featured Post

Connect further...control easier

With the ATEN CE624, you can now enjoy a high-quality visual experience powered by HDBaseT technology and the convenience of a single Cat6 cable to transmit uncompressed video with zero latency and multi-streaming for dual-view applications where remote access is required.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

This article is a guide to configure bridging on Cisco Routers.  This is something I never knew was possible until after making a few phone calls to Cisco.  Using bridging saved our company money by not requiring us to purchase a new switch.  Bridgi…
Creating an OSPF network that automatically (dynamically) reroutes network traffic over other connections to prevent network downtime.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

821 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question