Solved

GLBP configuration

Posted on 2008-06-13
1
894 Views
Last Modified: 2008-06-25
I have two routers and each one is connected to an internet connection. I want to have a load balancing protocol between those routers, and I think GLBP is the best. Would you please paste a sample configuration for a typical case ?

Thanks
0
Comment
Question by:Farrahi
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
1 Comment
 
LVL 5

Accepted Solution

by:
Melaleuca earned 500 total points
ID: 21780942
Well if you are looking for just the basic GLBP all you would need to do is
first router
int fa0/0
ip address 10.1.1.2 255.255.255.0
glbp 10 ip 10.1.1.1

second router
int fa0/0
ip address 10.1.1.3 255.255.255.0
glbp 10 ip 10.1.1.1

This is very basic if you want to configure tracking features to and other things like authentication they will take a couple more command. here is a good link for the other things.
http://www.cisco.com/en/US/docs/ios/12_2t/12_2t15/feature/guide/ft_glbp.html
0

Featured Post

[Webinar] How Hackers Steal Your Credentials

Do You Know How Hackers Steal Your Credentials? Join us and Skyport Systems to learn how hackers steal your credentials and why Active Directory must be secure to stop them. Thursday, July 13, 2017 10:00 A.M. PDT

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

There are times where you would like to have access to information that is only available from a different network. This network could be down the hall, or across country. If each of the network sites have access to the internet, you can create a ne…
There are two basic ways to configure a static route for Cisco IOS devices. I've written this article to highlight a case study comparing the configuration of a static route using the next-hop IP and the configuration of a static route using an outg…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

687 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question