Solved

Need Help

Posted on 2008-06-13
2
238 Views
Last Modified: 2010-04-09
I need to connect through VPN one central office with at least 2 remote offices, I also need to support mobile remote VPN clients.

For the central office i got PIX 506E, and for each one of the remote offices i got PIX 501. The mobile remote VPN clients will be Cisco VPN software client

Every office has a DSL access to the internet.  the main office ahs a ststic ip. the static ip ia configured on a netgear router (model DG 834G). the other 2 locations also have the same netgear routers..
 i ahve access to pdm from the 506E i just need to know the steps to configure these .
can abody help
0
Comment
Question by:crlpnt
2 Comments
 
LVL 79

Accepted Solution

by:
lrmoore earned 500 total points
ID: 21788284
Here's the complete book on setting up VPN's with PIX
http://www.cisco.com/en/US/docs/security/pix/pix63/configuration/guide/sit2site.html

Be aware that you will never be able to have a mobile client connect to the main site and access any data at either of the remote offices through the established lan-to-lan vpn tunnels. This feature would require an upgrade of the 506e to an ASA5510.

 
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

I recently updated from an old PIX platform to the new ASA platform.  While upgrading, I was tremendously confused about how the VPN and AnyConnect licensing works.  It turns out that the ASA has 3 different VPN licensing schemes. "site-to-site" …
How to set-up an On Demand, IPSec, Site to SIte, VPN from a Draytek Vigor Router to a Cyberoam UTM Appliance. A concise guide to the settings required on both devices
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

809 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question